686145
27
Zoom out
Zoom in
Previous page
1/66
Next page
PC-VK1146_IM 02.11.17
27
Para hacer una bolsa con unas existencias a granel, haga lo
siguiente:
1. Mida la longitud deseada de la lámina de plástico.
2. Separe la lámina de plástico con un corte en línea recta.
3. Coloque la lámina de plástico sobre el alambre de sellado
y cierre la tapa. Presione rmemente hacia abajo para
que se bloquee de forma audible en ambos lados.
4. Pulse el botón SEAL. Se encenderá el botón. Pasados
aproximadamente 9 segundos el botón se apaga y se
sella el borde.
5. Pulse el botón de liberación para abrir la parte superior.
Para envasar al vacío y sellar una bolsa
Ahora puede envasar los productos en la bolsa previamente
hecha.
NOTA:
Por favor, consulte también las “Información sobre el
almacenamiento de alimentos” y el capítulo “Función de
los controles”.
¡Sólo se pueden sellar las bolsas que contengan
líquidos! Los líquidos pueden ser aspirados. Utilice
únicamente la función SEAL (sellar).
1. Coloque los productos en la bolsa.
2. Coloque el extreme abierto de la bolsa dentro de la cá-
mara de vacío. La toma de aire no debe cubrirse.
3. ¡No lo arrugue! Estire la lámina de plástico por encima del
alambre de sellado.
4. Cierre la parte superior hasta que encaje en su lugar.
5. Utilice los botones FOOD y / o SPEED para seleccionar la
función deseada.
6. Pulse el botón VAC SEAL. Se encenderá el botón.
Cuando se apague el botón habrá terminado el proceso.
NOTA:
Pulse el botón STOP para cancelar una operación.
Para detener un proceso de bombeo al que seguirá
inmediatamente sellado térmico, pulse el botón
STOP y luego el botón SEAL.
7. Pulse el botón de liberación para abrir la tapa.
Finalizar la operación
Retire el enchufe del tomacorriente.
Deje que el aparato se enfríe durante 5 minutos antes de
guardarlo.
Limpieza
AVISO:
Desconecte de la alimentación antes de limpiar. Espere hasta
que el aparato se haya enfriado completamente.
No sumerja el aparato en agua. Puede provocar electrocución o
incendio.
ATENCIÓN:
No use cepillos metálicos ni otros utensilios abrasivos
para limpiar.
No use agentes limpiadores agresivos ni abrasivos.
El aparato se debe limpiar por dentro y por fuera utilizando
un paño ligeramente húmedo.
Junta sellada inferior, recipiente de recogida
Limpie dichas piezas en un bol de agua caliente. Luego
seque todo antes de montar las piezas de nuevo.
Almacenamiento
Limpie el aparato como se describe.
Si no lo usa, cierre únicament la tapa para evitar daños a
las juntas selladas.
Recomendamos almacenar el aparato en su embalaje
original si no lo utiliza durante un largo período de tiempo.
Mantenga siempre el aparato en un lugar bien ventilado y
seco, fuera del alcance de los niños.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook VK 1146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook VK 1146 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info