685716
36
Zoom out
Zoom in
Previous page
1/58
Next page
36
PC-VK 1133_IM_new 18.06.18
Notes on Use
Location
Anti-slip and at surfaces are suitable locations.
Supply Cord
Completely unwind the power cord from the bottom of the
device. Insert the cable into the cable duct so that the device
cannot tilt over.
Electrical Connection
1. Ensure that the mains power corresponds to the one of
the appliance. Please refer to the specications on the
type label.
2. Connect the supply cord to a properly installed grounding
receptacle.
Operation
To make a bag from bulky wrap foil
Sealing wrap foil is also available as bulk stock.
NOTE:
In order for the air to be vacuumed well, the wrap foil must
contain a special texture! This may be a ribbed, honeycomb
or diamond texture.
In order to make a bag from the bulk stock, proceed as
follows.
1. Measure the desired length of the wrap foil.
2. Detach the wrap foil with a straight cut.
3. Insert the foil into the vacuum chamber up to the stop.
Push both levers down simultaneously and rmly until
you hear a click sound.
4. Press the SEAL button. The button lights up. After approx.
7 seconds the button goes out and the seam is sealed.
5. Press both release buttons under the levers simultane-
ously to take out the bag.
To Vacuum and Seal a Bag
You may now package items in the previously made bag.
NOTE:
Please also refer to the “Notes on Storing Food” and
chapter “Function of controls”.
Bags with liquids are only to be sealed! Liquid could be
sucked in. Only use SEAL function.
1. Place the items in the bag.
2. Insert the open end of the bag into the vacuum chamber
up to the stop.
3. Avoid creasing! Smooth the foil.
4. Push both levers down simultaneously and rmly until
you hear a click sound.
5. Use the MODE and / or FOOD buttons to select a function
as desired.
6. Press the VAC SEAL button. When the button goes out,
the process is nished.
NOTE:
Press STOP button to cancel an operation.
If you want to cancel the pumping process ahead of
time in order to seal immediately, press the SEAL
button.
7. Press both release buttons under the levers simultane-
ously to take out the bag.
8. There is a drawer on the back of the device in which the
liquid from the vacuum chamber is collected. Empty the
collection tray if uids were collected during the process.
Finish Operation
Remove the plug from the receptacle.
Allow the appliance to cool down for 5 minutes prior to
storage.
Cleaning
WARNING:
Disconnect from mains power supply before cleaning. Wait until
the appliance has cooled down completely.
Do not submerge the appliance into water. This may lead to elec-
tric shock or re.
CAUTION:
Do not use a wire brush or other abrasive utensils for
cleaning.
Do not use aggressive or abrasive cleaning agents.
The enclosure may be wiped from inside and out-side
using a slightly damp cloth.
Clean the collection tray in soapy water if necessary.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook VK 1133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook VK 1133 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info