51
Recipes
Please refer to our recipe book provided for recipes. An English version is
available for download on our website: www.sli24.de.
Further recipes and suggestions can be found online (e.g. www.rezeptwelt.
de, www.chefkoch.de, www.kochbar.de).
There are plenty of recipes and cooking instructions available! When using
recipes from the Internet, please note that there can be recipe variations due
to technical discrepancies of your MKM 1074.
Cleaning
WARNING:
• Always remove the plug before cleaning.
• Let the device cool down after cooking. There is a risk of burning in the heating area!
• Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise this might result
in an electric shock or re.
• The blades on the knife block are very sharp. A risk of injury exists!
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• The individual parts are not dishwasher-safe. They could deform or
discolor due to heat and aggressive cleaning agents.
NOTE: Preliminary Cleaning
Fill the blender half with water and press and hold the TURBO button for
approx. 10 seconds. Then pour out the liquid.
• For thorough cleaning, please remove the mixing vessel.
• Clean all parts of the device after each use.
Housing
Only a moderately moist cloth should be used for cleaning the outside of the
device. Dry with a cloth.
Accessories
NOTE:
Discoloration caused by food (e.g. carrots, curry) is best removed with a
cloth and some cooking oil.
• All parts that came into contact with food can be cleaned with soapy
water.
• Carefully remove the knife block from the blender as described in the
chapter “Knife block (Fig. 5)”. Only clean it under running water. Use a
dishwasher brush if needed. Reattach to the blender after cleaning and
drying.
• Use a special cleaning agent for stainless steel to remove stubborn
staining.
• Remove the sealing washers from the lid or the steam attachment for
easier cleaning. Make sure to position the sealing washers correctly
as described in the chapter “Sealing washers of the lid and the steam
container (Fig. 3)” after cleaning and drying.
Storage
• Clean the device as described. Let the accessories dry completely.
• Do not lock the blender with the measuring cup in order to allow for
proper ventilation.
• We recommend storing the device in its original packaging when not
using it for a longer period of time.
• Store the device out of reach of children in a well-ventilated and dry
place.
Troubleshooting
The device does not function
Possible cause:
No power supply.
Remedy:
• Check the switch position on the back of the device.
• Check the mains connection.
• Check your household fuse.
Possible cause:
Your device is equipped with safety switches.
These prevent the motor from accidental startup.
Remedy:
• Check the correct installation of the
- blender,
- lid or
- steam attachment.
Possible cause:
The device is defect.
Remedy:
• Contact our customer service or an expert.
The device turns off during operation and emits signal sounds
Possible cause:
For safety reasons, operation is limited to 20 minutes when not setting a
timer (SPEED button only).
Remedy:
• Start the device again.
• Set the timer.
Possible cause:
The blender is overloaded. The indicator lamp next to the
icon lights up.
Remedy:
• Reduce the quantity in the blender.
• Start the program again.
The TURBO button is locked or the device operates with speed setting
5 at most
Possible cause:
You have selected a cooking program. That only allows for operating with
speed setting 5 at most.
Or:
After a cooking program has nished, the heating area is still hot.
