552313

ProfiCook PC-DKI 1067 Manual

54
Zoom out
Zoom in
Previous page
1/110
Next page
54
NOTE:
• The display shows the selected setting.
The respective pilot lamp above the SE-
LECT button will also light up.
• Please observe that the cooking behavior
in the pots differs. It depends on the nature
and the quality of the cooking vessels.
Enter Off Time
1. Turn the appliance on and select any range or
temperature.
2. Press the SELECT button to select the control
after the shut-off time. The display will show “0”.
The indicator light TIME above the SELECT
button will ash.
3. Set a turn-off time between 5 and 180 minutes
by using the UP or the DOWN button.
NOTE:
• Press the UP or DOWN buttons to set
the time in increments of 5 minutes. The
display will show the desired setting.
• Once you have set a time, the display will
remain for a few seconds. The remain-
ing time and the function that you have
chosen beforehand are then shown alter-
nately.
• You may change the previous turn-
off time at any time. The other settings
(POWER and TEMP.) will remain.
• After the set time has elapsed, the cook-
ing time will automatically be turned off
and a beep will sound. The appliance is in
standby mode again.
• In order to cancel the shut-off time before-
hand, set the time to “0”. You may also turn
the appliance off directly with the ON/OFF
button.
Child safety
To safeguard against unwanted use, the appliance
is equipped with a disable function.
• In order to activate the child lock, press the
UP and DOWN buttons simultaneously. The
display will show “L”.
• Press the UP and DOWN buttons again at the
same time to cancel the disable function.
NOTE:
When the child lock is active, all the buttons
except for ON/OFF are locked. The appliance
can only be operated again after unlocking it.
Automatic shut-off
The hot plate turns off automatically after
120 minutes, if no input was given over the opera-
tor control panel during this time. This switching
serves as security for you.
Switching off
a) Switch off one single cooking hob
1. Press the MIN button to select the lowest
power setting.
2. Press the DOWN button. The cooking hob
turns off.
b) Switch off the entire hotplate
1. Press the ON/OFF button.
NOTE:
• The hot plate is reset from its operational
state to standby mode. The fan may conti-
nue to run for a period of time.
• The indicator lights will go out.
2. Pull the plug.
3. Let the device cool down, before you put it
away.
Pan recognition
The device has a pot recognition function. It gives
several warnings to indicate that the cookware has
been removed. The message “E0” appears on
the display. For safety reasons, the appliance will
switch to standby mode after about 30 seconds.
The fan may continue running.
In this context, please pay attention to the follow-
ing:
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-DKI 1067 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-DKI 1067 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info