Manual ProfiCook PC-DKI 1067 (page 53 of 110) (English, German, Dutch, French, Italian, Polish, Spanish)

552313

Zoom out

Zoom in

1/110

Do not use the following types of pots :

Pots with

bended

(convex/para-

bolic) bases.

Pots with a

base diameter

of less than

12 cm.

Pots stand-

ing on feet.

Electrical Connection

Connected load/wattage

The hob can take up an overall load of 3500 W.

Because of this high connected load it is recom-

mended to use a separate connection protected

over a 16 A safety switch.

CAUTION: OVERLOAD!

Do not use extension cables or multiple sockets

as the power consumption of this device is too

high for these.

Connection

• Before inserting the mains plug into the socket

check whether the voltage which you intend to

use corresponds to that of the machine. Please

see the label on the machine for details.

• Only connect the machine to a correctly in-

stalled safety socket.

Operation

• The appliance has a ne sensor. A light touch

of the control panel with the nger is sufcient.

Use the nger, not the tip of the nger.

• Each registered touch is conrmed by a beep.

• In the event that the appliance does not react

when you press the buttons, clean the control

panel with a soft, dry cloth. Even a thin lm of

water can make the operation difcult.

• Ensure that the control panel is always clean

and dry and that it is not covered by objects of

any kind.

Standby mode

After you have connected the device’s plug to the

mains supply, the hub is in standby mode. A signal

will sound.

• Put a suitable pot on the cooking zone.

• Press the ON/OFF button to start cooking. The

indicator light above the ON/OFF button lights

up. The indicator light for POWER above the

SELECT button will ash.

NOTE:

You must now press the SELECT button

within 60 seconds, or the hotplate will switch

back to the operating mode of standby.

Selecting performance, shut-off time or tem-

perature as the function

Press the SELECT button to select the control by

power, shut-off time or temperature. The indica-

tor lights POWER, TEMP. and TIME will show the

selection.

Selecting the power or temperature of the

hotplate

• Use the UP or DOWN buttons to select a tem-

perature level between 60 °C and 240 °C or

one of the 6 power settings:

Left cooking hob 500/800/1200/1500/1800/

2000 W

Right cooking hob 500/800/1000/1200/1300/

1500 W

• Use the MAX or MIN buttons to directly select

the highest or lowest power setting respectively.

The display will show the max. or min. power

setting.

NOTE:

• The temperature setting changes in inter-

vals of 20°.

• The left cooking hob always starts at

1200 W or a temperature setting of

240 °C.

• The right cooking hob always starts at

1000 W or a temperature setting of

240 °C.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-DKI 1067 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ProfiCook PC-DKI 1067 Manual

Product: