Manual ProfiCook KA 1138 (page 36 of 50) (English, German, Dutch, French, Italian, Polish)

685738

Zoom out

Zoom in

1/50

PC-KA1138_IM_new 11.09.2017

Electric Connection

1. Ensure that your mains power corresponds with the specications of

the appliance. The specications are printed on the type label.

2. There is a cable storage at the bottom of the appliance. Unwind the

required power cord. Pass the power cord through one of the open-

ings to ensure the rm stand of the unit.

3. Connect the mains cable to a properly installed and earthed wall

outlet. The indicator light for operation lights up.

Control panel

The buttons on the appliance are multi-functional touch buttons. To select

the different functions, the corresponding button must either be briey

tapped, or pressed longer.

Coffee Beans

CAUTION:

Use only roasted coffee beans for grinding.

Raw, frozen or liquid coffee beans may damage the grinder.

Adjustment of the Coarseness Setting

The coffee grinder has got 14 different coarseness setting.

Stage 1 = nely ground (strong coffee)

Stage 14 = coarsely ground (mild coffee)

How ne or coarse you grind the coffee depends on your taste. The sort

and roasting of the coffee beans also inuence the taste. With a little

practice, you easily will nd out which coarseness setting is the right one

for you.

RECOMMENDATION:

To reach the best avour, use the amount of coffee beans you need for

one brewing process only.

Remaining Coffee Beans

Remove the coffee beans from the appliance if they are older than one

week. They maybe have lost their aroma and will reduce the avour of

your coffee.

NOTE:

Store coffee beans in a sealed, air-tight container in the refrigerator to

ensure that the coffee will keep its typical avour.

Initial Operation

Time Setting

After connecting the

appliance

the power supply, the time will ash in the

display.

1. Tap the

min

button. The hours will ash.

2. Tap the

min

, button again, to set the current hour.

3. Conrm your setting with the

. button. The minutes will ash.

4. Repeat step 2 and 3 to set the current minute. Your coffee machine is

now ready for operation.

NOTE:

If you keep the

min

button pressed, a fast mode starts.

Switch the Appliance On and Off

• If you do not press any button for 3 minutes, the appliance switches

into standby- mode automatically. The display and all indicator lights

will turn off.

• You also can switch off the appliance manually by pressing and holding

the button for 2 seconds.

• To switch on the appliance again, press and hold the button for

2 seconds again. The time and the last program settings will be

displayed again.

Before Using the Appliance for the First Time

Before making coffee for the rst time operate the appliance twice with

clean water only and without paper lter. This removes dust, which may

have collected during transport. Follow the instructions given under the

chapter “Preparation with Coffee Powder”. Do not ll in coffee powder!

Operation

Set the Warm-Keeping Time

Set the time period you want your coffee to be kept warm after the brew-

ing process.

NOTE:

• The warm-keeping time can only be set whilst standby- mode.

• You can set any time between 5 and 40 minutes.

1. Press and hold the

button, until the display shows the time .

2. Use the

min

button to set the required warm-keeping time.

3. Conrm your setting with the

button. The current time is displayed

again.

Preparing the Coffee Machine

1. Close the coffee bean container.

2. Open the lid of the water tank.

3. Fill cold water according to the desired amount of cups of coffee into

the rear water tank. The water level is displayed on the indicator.

NOTE:

• You can use the pot to ll the water tank.

• Pour in only as much water as you want to brew cups. The

content of the water tank will be emptied completely during each

brewing process, regardless of the settings.

CAUTION:

Do not overll the tank! Do not ll it above the 10 mark.

4. Now close the lid of the water tank.

5. Refer to gure B on page 4! Turn over the lower fold of the paper

lter (size 1 x 4) and place it in the lter funnel. The paper lter may

not protrude over the edge of the lter holder!

6. Slide the lter holder into the appliance until it will lock in audible.

NOTE:

A safety switch prevents the start of the brewing process if the lter

holder is not inserted correctly.

7. Place the jug onto the warming plate.

CAUTION: Drip stop

Your appliance comes with a drip stop. It closes when removing the

coffee pot. This prevents the coffee from dripping onto the warming

plate if there is still water in the lter.

• Ensure that the lid is attached to the coffee pot. It opens the drip

stop.

• If there is still water in the tank, place the pot underneath as soon

as possible. Otherwise the lter might overow.

• Please also refer to the chapter  “Interruption of the Brewing

Process”.

8. If you want to make your coffee with coffee powder, read the chapter

 “Preparation with Coffee Powder”.

Preparation with Coffee Beans

Please follow the instructions under points  “Preparing the Coffee

Machine”.

9. Open the coffee bean container.

10. Use the regulator (14) to adjust the coarseness setting.

11. Fill the desired amount of coffee beans into the grinder. The maximum

lling capacity of 150 g may not be exceeded.

12. Close the coffee bean container.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook KA 1138 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 3,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ProfiCook KA 1138 Manual

Product: