685702
44
Zoom out
Zoom in
Previous page
1/74
Next page
PC-FR1177H_IM 12.12.18
44
Using the Appliance
1. Connect the appliance to a properly installed earthed
socket.
NOTE:
You will hear a beep sound and all symbols light up
briey. The
button lights red.
2. Press the
button to switch the appliance on. You will
see the pre-adjustment 190 °C and 3 minutes.
3. Select an auto function by using the button or set the
time (1 - 60 minutes) and the temperature (80 °C - 200 °C)
individually by using the buttons and .
NOTE:
You may use program P for preheating.
4. Press the
button to start the cooking process.
NOTE:
Once the pre-set temperature is reached, the
symbol will light green.
The symbol is switching between the colours red
and green. This is normal and it indicates that the
temperature is controlled by the thermostat and is
being maintained.
5. Using the handle, pull the fat tank with the basket from
the appliance.
6. Fill the basket with the desired food.
7. Slide the fat tank with the basket back into the appli-
ance. It must engage.
8. If necessary, shake the food after half the cooking time.
Pull it out of the fat tank with the basket on the handle.
WARNING:
Hot steam can escape!
Never shake the basket when it is in the fat tank,
because this may contain hot oil.
9. Place the fat tank with basket on a heat-resistant
surface.
10. Slide the cover of the release button towards the basket.
11. Press the release button to remove the basket. Shake
the contents of the basket.
12. Put the basket back in the fat tank. This must engage.
13. Slide the fat tank back into the appliance.
Pause Operation
Press the
button to pause the operation. The but-
ton is ashing. Press the button again to resume the
operation. The button is continuously lit again.
The operation will also be paused as soon as you re-
move the basket. In order to turn the appliance back on,
insert the basket again.
NOTE:
The appliance will start from the spot it has been
paused.
If, however, you pull out the power plug, your current
settings will be lost. When inserting the power plug
and pressing the
button the appliance will show the
pre-adjustment again.
End of Operation
1. After the time has elapsed, the appliance will auto-
matically switch into standby mode. After approx.
20 seconds, you will hear 5 beep sounds and the
symbol goes off.
2. Pull out the fat tank with the basket by the handle.
3. Place the fat tank with basket on a heat-resistant
surface.
4. Slide the cover of the release button towards the basket.
5. Press the release button to remove the basket. Put the
food in a heatproof bowl.
6. Slide the fat tank back into the appliance.
Cleaning
WARNING:
Always turn the appliance off before cleaning it and remove the
mains plug. Wait until the appliance has cooled down.
Do not immerse the appliance in water! Doing so may result in
an electric shock or re.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook FR 1115 H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook FR 1115 H in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info