814755

Proficare BSR 3042 Manual

45
Zoom out
Zoom in
Previous page
1/70
Next page
PC-BSR3042_IM 03.07.19
45
Maintenance and Cleaning
WARNING:
• Always switch off the appliance before servicing or cleaning and
disconnect it from the power adapter!
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or re.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
NOTE:
Do not attempt to lubricate the rollers with lubricants or oil.
Ignoring this would cause signicantly more dust or dirt to
adhere to the rollers.
• Clean the housing with a soft, dry cloth without additives.
• Use a soft cloth to gently clean the sensors (12/15/20).
CAUTION:
Prior to and after each use, check that the sensors are
clean. Otherwise, the appliance may tumble down a
staircase.
• Prior to and after each use, make sure that the nozzle
and vents are clear.
• For optimum performance of the appliance, you should
empty the dust container and clean the lters after each
use.
Emptying the Dust Container and Cleaning the Filter
CAUTION:
Never wash the lters under any circumstances.
Please refer to the images on page 4.
1. Press the corresponding surface to open the dust con-
tainer compartment.
2. Fold the handle upwards and remove the dust container
from the appliance.
3. Pull the HEPA lter out of the dust container. There is still
a rubber holder around the HEPA lter. Clean the HEPA
lter by tapping the dust out of it.
We recommend replacing the HEPA lter once a year.
CAUTION:
Do not use a brush to clean the HEPA lter. Using a
brush may damage the lter material.
4. Fold the cover of the dust container upwards. Then
remove the mesh lter from the dust container.
5. Empty the dust container while holding it over a garbage
can.
6. You can clean the dust container under running water.
To clean the mesh lter, use a soft paintbrush.
CAUTION:
• Allow the dust container to air dry. Do not, however,
expose it to direct sunlight.
• Only re-insert the lters into the dust container once
it is completely dry!
7. Reinsert the lters into the dust container. Make sure that
both the HEPA lter and the mesh lter are installed
properly.
Cleaning / Replacing the Side Brushes
If the side brushes are dirty, you may clean them with clean
water. Do not use any additional cleaning agents.
If the side brushes are worn or defective, replace them with
new ones.
1. The side brushes can be easily removed by pulling them
upwards.
2. When attaching the side brushes, pay attention to the
right (R) and left (L) markings. You will nd these mark-
ings on both the appliance and on the side brush.
Storage
• Clean the appliance as described and allow it to dry.
• We recommend that you keep the appliance in the origi-
nal packaging if it will not be used for long periods.
• Always store the appliance out of the reach of children
in a dry, well ventilated place. The storage temperature
should be between 0 and 40 °C.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proficare BSR 3042 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proficare BSR 3042 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info