814755

Proficare BSR 3042 Manual

43
Zoom out
Zoom in
Previous page
1/70
Next page
PC-BSR3042_IM 03.07.19
43
15 Stairway detection sensor
16 Drive wheel (left)
17 Air intake duct
18 Rubber lips
19 Drive wheel (right)
20 Stairway detection sensor
Remote Control (Figure C)
1 RESPOND button
2 START / PAUSE button
3 RANDOM button
4 AUTO button
5 FOCUS button
6 Direction buttons , , ,
Not Illustrated
Filter insert with mesh lter and HEPA lter
Notes for Use
• The appliance is operated via charged battery. Charge
the battery using the power adapter provided. Direct
power supply via power adapter is not possible.
• The appliance sucks up loose dirt through the nozzle.
For more efcient cleaning, the appliance is equipped
with a rubber lip.
• Do not use the appliance to vacuum building rubble.
• Dirty lters reduce the suction power of the appliance,
hence we recommend cleaning the dust container and
lters after each use.
• When the appliance hits a wall or other obstacles during
operation, it will change its driving direction.
• The appliance also cleans underneath furniture if they
have a ground clearance of at least 80 mm. If the appli-
ance gets stuck under a piece of furniture, a beep will
sound and the robot vacuum cleaner switches itself off.
• If the appliance is lifted during operation, it will emit
a beep and the power indicator light ashes red. The
appliance will then switch off.
• Due to its design, the cleaning of carpets and the driving
over edges is only possible to a limited extent. Short-pile
carpets with low edges can be surmounted. For long-pile
carpets, please use a conventional 230 V oor vacuum
cleaner.
• The sensors at the bottom of the appliance detect steps
and other dips, so that it can not drop down.
CAUTION:
Prior to each use, ensure the sensors are clean, or
else the appliance may crash.
Depending on the condition of the step (colour scheme,
design, etc.), it may happen that the sensors can still not
detect the landing. Especially near a stairway, please do
not leave the appliance unattended.
Before Using the Appliance
• Clear the oor of any objects lying around that could
obstruct the side brushes, get caught in the nozzle or
stop the appliance from cleaning.
• Remove any objects that could be knocked over (such
as vases, small lamps, decorative items, etc.).
• Make sure that no cables, cords or fringes, e.g. of
curtains, table cloths or carpets can be accessed. If nec-
essary, fold the edges with its fringes under the carpet.
The appliance may otherwise get entangled in it.
Putting into Service
Inserting Batteries into the Remote Control
(Batteries are not included in the scope of delivery)
1. Open the battery compartment cover on the back of the
remote control.
2. Insert 2 batteries of type R03 “AAA” 1.5 V, observing
the correct polarity (see markings on the bottom of the
compartment)!
3. Close the battery compartment cover.
WARNING:
Do not expose batteries to excessive heat such as sun-
light, re or similar. There is a risk of explosion!
CAUTION:
• Batteries may leak and lose battery acid. Remove the
batteries if the remote control is not being used for an
extended period of time.
• Different battery types or new and used batteries must
not be used together.
• Do not dispose of batteries along with domestic waste.
Return used batteries to the relevant collection facilities
or your retailer.
Mounting the Side Brushes
Please refer to gure B on page 3.
• Plug the side brush (10) with the imprint R into the
appliance at the inscription R below. It must engage with
a click sound.
• Plug the side brush (14) with the imprint L into the
appliance at the inscription L below. It must engage with
a click sound.
Charging the Battery
Before you can use the appliance, you must rst charge the
integrated rechargeable battery.
1. Plug the power adapter into a properly installed shock-
proof socket.
2. Make sure the appliance is switched off. (Main switch in
position )
3. Connect the appliance with the plug-in power adapter by
inserting the plug into the socket (6).
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proficare BSR 3042 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proficare BSR 3042 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info