788969

Probuilder 18199 Manual

56
Zoom out
Zoom in
Previous page
1/74
Next page
56
Useful advice
The plate compactor is designed to compact
asphalt and grained material, such as gravel,
by means of vibrations.
It must not be used on a solid, tightly
compacted surface such as hardened
asphalt,concreteortileswherethepowerof
the vibrations cannot be transferred to the
surface.
If possible, smooth over and level the area to
becompactedbeforestartingwork.
Ifthewatercontentofthegroundistoo
low,itcannotbecompactedadequately.If
itistoohigh,thecompactorwillleaveholes
fullofwater,whichwillreducethesurface’s
load-bearing capacity. Dry surfaces should
be dampened before using the compactor.
Ifthewatercontentisveryhigh,theengine
willcutout.
Inspection and checks
Before each use
Check the engine oil level and check for
leaks.
Check that all bolts and nuts are tightened.
Lubricateallmovingpartsasrequired.
Check for defective parts.
Check that the operating mechanisms are
functioning correctly.
Clean the underside of the compactor plate
to prevent build-up of deposits.
Periodic inspections after the rst 20 hours
of operation and then after every 50 hours
of operation:
Change the engine oil.
Clean the air lter.
Check the condition and tension of the V-belt
Check the oil level in the compactor.
Check the spark plug.
Check the vibration-damping rubber shock
absorbersforwearanddefects.
Every 200 hours of normal operation:
Replace the oil in the vibrator.
For every 300 hours of operation or
annually:
Replace the V-belt.
Replace the spark plug
Replace the air lter.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Probuilder 18199 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Probuilder 18199 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info