807468

Pro-User PSI1000TX Manual

5
Zoom out
Zoom in
Previous page
1/82
Next page
5
• Avoid getting electrolyte on your skin or clothes. It is acidic and can cause burns. If battery
acid contacts skin or clothing, wash immediately with water. Baking soda neutralizes lead
acid battery electrolyte. If electrolyte gets into your eyes, immediately flood your eyes with
running cold water for at least 20 minutes and get medical attention immediately. Eye
protection is therefore recommended.
• Always keep metal objects or other materials that can short circuit the terminals of the
battery or the inverter securely away.
• Power-o the device before making or breaking the connections to the battery.
• Observe technical instructions of the seller or the manufacturer of your battery.
• Check if all connections are tight and clean. Loose or dirty connections could result in
overheating, electrical sparks and fire. Use terminal grease where required.
• Never smoke or allow a spark or flame in vicinity of the battery.
• Never try to charge a damaged or frozen battery.
• Do not place the device directly on top of the battery or vice versa or on a surface
constructed from combustible material.
• Read your car´s owner's manual. Some vehicle manufacturers may have special requirements
before charging or discharging the vehicle´s battery (e.g. fuses that have to be removed or
certain security demands).
Environment
EnvironmentEnvironment
Environment
• Only use the product in environments from 0°C ~ 45°C.
• Do not operate the product in damp, wet or dusty environments: Never expose the inverter
to rain or snow. Doing so may result in damage to the inverter or other equipment installed in
the system or result in electric shock or fire. Do not operate the unit in explosive
atmospheres, such as in the presence of flammable liquids, gases or dust. Do not put
batteries, or anything that should be protected from sparks around the inverter. Doing so
may result in fire or explosion.
• To avoid heat accumulation, do not cover the device. To prevent overheating , ensure that air
inlets and ventilation is not obstructed. Do not expose the device to a heat source (such as
direct sunlight or heating). Avoid additional heating of the device in this way.
Electrical Cables
Electrical CablesElectrical Cables
Electrical Cables
• If cables have to be fed through metal holes or other walls with sharp edges, use ducts or
cable bushings to prevent damage.
• Do not lay cables which are loose or bent next to electrically conductive material (metal).
• Do not pull on the cables.
• Avoid to lay 230 V AC mains cable and 12 V DC cables in the same duct.
• Prevent all cables from being stepped on, tripped over, or being damaged by e.g. sharp edges
or hot surfaces.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User PSI1000TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User PSI1000TX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info