Manual Pro-User PSI1000TX (page 4 of 82) (English, German, Dutch, French)

807468

Zoom out

Zoom in

1/82

• Use only approved accessories (especially all cables) or parts fully consistent with the

requirements. The installer is responsible for ensuring that the correct cable and fuse sizes

are used.

• The surface temperature can reach up to 65°C. Power-o and stop using the device

immediately, if the unit is smoking or is showing any abnormal behaviour.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they are

supervised or have been instructed on how to use the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the

appliance.

• Installing the device, maintenance and repair work may only be carried out by qualiﬁed

person who are familiar with the risks involved, the relevant regulations and with the

guidelines and safety precautions to be applied.

• Do not disassemble the inverter, the internal circuit contains hazardous voltages.

Attempting to service the unit yourself may result in electric shock or ﬁre and will void the

unit warranty.

• Always keep metal objects or other materials that can short circuit the terminals of the

battery or the inverter securely away. A resulting spark or short-circuit may not only damage

the device, but also cause an explosion and potentially produce a current high enough to

weld a ring or the like to metal. Remove personal metal items such as rings, bracelets,

necklaces and watches when working on the device or the battery.

• Operate the inverter only, if all cables and the housing are undamaged and all connections

are tight and clean. Loose or dirty connections could result in overheating, electrical sparks

and ﬁre.

• Do not connect AC output terminals of the inverter to an incoming AC source (or the grid).

• Do not connect DC input terminals of the inverter to an incoming AC source.

• Never use the inverter on vehicles where the positive terminal of the battery is connected to

the chassis.

• Never connect cables in reverse polarity or short-circuit connected cables. This may blow

internal fuses and may damage the inverter permanently.

• A fuse should be provided at a distance of max. 30 cm from the battery´s positive terminal.

Failure to do so, may cause damage to the cabling or battery if a fault (e.g. over-current or

short circuit) occurs. Only use high quality copper cable and keep the cable length short.

• Do not operate appliances that may feed AC main power back into the inverter. This might

damage the inverter.

• Ensure the device is standing ﬁrmly. The device must be set up and fastened in such a way

that it cannot tip over or fall down.

• Never connect devices that have a higher power requirement than the peak output power of

the inverter. Note that some devices may require more starting current than the type plate of

the device indicates.

Working with Batteries

Working with BatteriesWorking with Batteries

Working with Batteries

• Batteries can store large amounts of energy and improper handling can be dangerous. Never

connect to a battery with an unsuited voltage or other unsuitable or damaged batteries.

• Keep children away from batteries and acid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User PSI1000TX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User PSI1000TX Manual

Product: