807540

Pro-User DRC4310DC Manual

11
Zoom out
Zoom in
Previous page
1/64
Next page
11
Please always pair the monitor and camera before the 1st operation.
Testing the back-up camera system after Installation:
1. Check if the vehicle’s negative battery cable (ground) has been reattached.
2. Turn the ignition key to the accessory position - do not start the vehicle
3. Engage the parking brake, and put the vehicle´s shifter in the reverse position (backup lights are lit).
If not already done: Please pair your camera to the monitor (as described in paragraph Pairing). The
System should activate itself. If not, press the Power-button on the Monitor
4. After testing (and re-adjusting if needed) the unit, all cabling should be installed permanently:
Route all wires behind interior panels or under carpeting. Use the supplied cable ties to keep excess
wires neat and compact.
NOTE: UNDER EXTREME BRIGHT LIGHT CONDITIONS, THE SCREEN IMAGE MAY TAKE A FEW
SECONDS TO STABILIZE. PLEASE WAIT UNTIL THE IMAGE HAS STABILIZED BEFORE BACKING UP.
Pairing:
Enter the Menu by pressing the MENU-button and select the “Pair” icon with the arrow buttons and press
ENTER. Shortly after, press the rubber button on the bottom of the camera until the signal is received
by the monitor.
Backup-Camera-mode: If the device is in standby, press the POWER button to supply power to the
monitor. The picture on the monitor will automatically turn on or switch from another mode to Backup-
Camera-mode, when the vehicle is in reverse gear (monitor receives video signal from backup-camera).
Orientation:
In the Menu “Picture direction” you can change the orientation of the picture. These different views
allow you to mount the camera and monitor in any position with keeping the right picture on the monitor.
Simply enter the “Picture direction” menu by choosing it and pressing the Power button. The orientation
of the picture will change every time pressing the Power button. To save the settings and exit the screen
please press the menu button.
OPERATION (Backup-Camera)
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User DRC4310DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User DRC4310DC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info