Manual Pro-User 91535 Saffier III (page 36 of 56) (English, German, Dutch, French)

601357

Zoom out

Zoom in

1/56

MOUNTING OF THE BIKE CARRIER ONTO THE HITCH BALL

When mounting the bike carrier to the car, it is best that the car is parked

straight, the engine is turned off and the parking brake is activated. Make sure

that the hitch ball is undamaged, clean and not greasy!

The bike carrier can be mounted with the coupler on the

hitch ball of your car. Slightly tighten the big bolt

(M16x90). Check if the carrier runs parallel to you car (or

bumper of your car). Next, tightly screw the bolt down with

the supplied key until the carrier can no longer move on

the hitch ball.

TILTING MECHANISM

For easy access to the boot of your car, even if the bikes are mounted on the

carrier, you may use the tilting mechanism.

The bike carrier has two locking pins to

secure the tilting mechanism. To tilt the

carrier, you rotate the two locking pins by a

quarter turn so the handles are horizontal.

Subsequently you pull out the two pins. With

one hand, keep a firm grip on the frame or

the bikes, so that the carrier cannot fall

down in an uncontrolled movement. It is now

possible to tilt the carrier.

To secure the carrier again, you have to lift it and

push the two locking pins back in. Subsequently

you rotate the pins again by a quarter turn so the

handles are vertical with the long part downwards.

You will hear a click once they are secured.

Make sure that both locking pins are secured before you continue

driving!

Locking pins

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User 91535 Saffier III in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User 91535 Saffier III Manual

Product: