601357
35
Zoom out
Zoom in
Previous page
1/56
Next page
35
Step 4
Parts:
Mounting:
Loosen and remove the little screws intended for the mounting of the number
plate holder from the light holder rail and fasten the number plate holder to the
rail. The number plate holder has to be level (or just above) with the lighting.
Attention: The fastening clips to secure the number plate are incorporated in the
number plate holder and can be pressed out.
With the provided cable ties, the light cable can be fastened neatly at the bottom
of the carrier. Make sure the cable will not interfere with the tilting mechanism.
Slide the six short, black straps through the little slots in
the wheel holder, starting inside-out, going around the
wheel holder and then outside-in (see picture).
Unscrew the plastic rotary knob of each frame holder,
so the clamps can be folded open. First attach the
rubber ring around the U-frame and put the clamp
around it. Subsequently, re-attach the holder and
screw the plastic rotary knob until you can just turn
the frame holders (the frames of the bikes have to be
attached to it, so they have to be movable). The sides
with the straps are intended to fasten the bike.
End result:
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User 91535 Saffier III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User 91535 Saffier III in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info