553957

Pro-form THINELINE PRODESK - PFTL17014 Manual

15
Zoom out
Zoom in
Previous page
1/36
Next page
15
4. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase or decrease button or one of the
numbered Incline buttons. Each time you press one
of the buttons, the treadmill will gradually adjust to
the selected incline setting.
5. Follow your progress with the displays.
As you walk or run on the treadmill, the display can
show the following workout information:
• The elapsed time
• The distance that you have walked or run
• The workout intensity level
• The approximate number of calories you have
burned
• The approximate number of calories you are
burning per hour
• The incline level of the treadmill
• The speed of the walking belt
• Your heart rate (see step 6)
• The matrix
The matrix offers several display options. Press the
increase and decrease buttons next to the Enter
button until the desired option is shown.
The Speed option will show a profile of the speed
settings of the workout. A new segment will appear
at the end of each minute.
The Incline option will show a profile of the incline
settings of the workout. A new segment will appear
at the end of each minute.
The Calorie option will show the approximate
amount of calories you have burned. The height of
each segment represents the amount of calories
burned during that segment.
As you exercise, the workout
intensity level bar will indicate
the approximate intensity level
of your exercise.
The display will also show a track that represents
1/4 mile (400 m). As you exercise, the rectangles
around the track will show your progress. The num-
ber of laps you complete will be displayed next to
the track.
Press the Home button to return to the main menu.
If necessary, press the Home button again.
The wireless symbol in the bot-
tom right corner of the display
will show whether the console
is connected to your wireless
network. If it is flashing, the
console is not connected. If it
remains solid, the console is connected.
To reset the displays, press the Stop button,
remove the key, and then reinsert the key.
6. Measure your heart rate if desired.
Before using the heart rate monitor, remove the
sheets of plastic from the metal contacts, if neces-
sary. In addition, make sure that your hands are
clean.
To measure your
heart rate, stand
on the foot rails
and hold the
metal contacts
on the handrails
for approximately
ten seconds—
avoid moving
your hands.
When your pulse
is detected, fi rst
a heart symbol in the calorie display will appear;
next, one or two dashes will appear; and then your
heart rate will be shown. For the most accurate
heart rate reading, continue to hold the con-
tacts for about 15 seconds.
Contacts
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form THINELINE PRODESK - PFTL17014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form THINELINE PRODESK - PFTL17014 in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info