Manual Pro-form POWER PAK - PFMC0825 (page 4 of 8) (English)

553984

Zoom out

Zoom in

1/8

ASSEMBLY

Attach a 100-pound Cap (3) to one end of the

100-pound Bar (2) with an M4 x 12mm Flat Head

Screw (4). Attach the other Cap in the same

manner.

3. Attach the Bracket (1) and the 100-pound Bar (2)

to the Tray Cover (E) with two M8 x 19mm Flat

Head Screws (5). Make sure that the 100-pound

Bar is centered over the Tray Cover and that

the Screws are fully tightened.

2. Locate the Top Tray (A) on the resistance system.

Have a second person hold the Top Tray and the

Bottom Tray (not shown) together. Remove the

two indicated Button Bolts (B), the two Washers

(C), the two Nylon Locknuts (D), and the Tray

Cover (E) from the Top Tray.

Before beginning assembly, make sure that

you have read and understand the informa-

tion in the box above.

Before beginning assembly, carefully read the

ollowing information and instructions:

• Assembly requires two people.

• Tighten all parts as you assemble them, unless

instructed to do otherwise.

• Make sure all parts are oriented as shown in the

drawings.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

The following tools (not included) may be

required for assembly:

• One standard screwdriver

• One Phillips screwdriver

• One hex key (included

with the MAX PACK

resistance system)

Assembly will be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form POWER PAK - PFMC0825 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-form POWER PAK - PFMC0825 Manual

Product: