553984

Pro-form POWER PAK - PFMC0825 Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
3
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the resistance system.
IMPORTANT PRECAUTIONS
1
. Read all instructions in this manual and in the
literature accompanying the resistance sys-
tem before using the resistance system. Use
the resistance system only as described in
the literature.
2. It is the responsibility of the owner to ensure
that all users of the resistance system are
adequately informed of all precautions.
3. Keep children under 12 and pets away from
the resistance system at all times.
4. Keep hands and feet away from moving parts.
5. Use only the resistance included with a MAX
PACK. Do not use other types of weight with
the resistance system.
6
. When adding resistance, both ends of the
resistance bars must rest under the two “U”-
channels. Add and remove resistance bars
from the “U”-channels one resistance bar at a
time.
7. Keep clear of the area around the “U”-chan-
nels while the resistance system is in use. Do
not add or remove resistance bars from the
“U”-channels while the end of the long cable
is pulled out.
8. Make sure that all parts are properly tight-
ened each time the resistance system is
used. Replace any worn parts immediately.
9. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
BEFORE YOU BEGIN
Thank you for selecting the MAX PACK resistance sys-
tem. The MAX PACK uses progressive resistance. As
the resistance bars begin to bend, the amount of resis-
tance will increase gradually.
As the resistance bars
bend further, the resistance will increase rapidly. The
MAX PACK is designed to increase the amount of
resistance available on the resistance system.
For your benefit, read this manual carefully before
using the MAX PACK and the resistance system. If
you have questions after reading this manual, see the
front cover of this manual. T
o help us assist you,
please note the product model number and serial
number before calling. The model number is
PFMC0825.0. The serial number can be found on the
product packaging. Record the serial number on the
front cover of this manual.
T
o avoid a registration fee for any service needed
under warranty, you must register the MAX PACK
at www.iconservice.com/registration.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form POWER PAK - PFMC0825 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form POWER PAK - PFMC0825 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info