554135
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
12.Make sure that all parts of the crosstrainer are properly tightened.Note: Some hardware may be left
over after assembly is completed.
T
o protect the floor or carpet from damage, place a mat under the
crosstrainer.
10.The Console (16) requires four 1.5V “D” batteries;
alkaline batteries are recommended. Remove the indi-
cated screw from the battery drawer. Pull the battery
drawer open and insert four batteries.
Make sure that
the batteries are oriented as shown by the mark-
ings inside of the battery drawer.
Close the battery
drawer and reattach the screw. Note: When the batter-
ies are installed correctly,the fan will turn on for a
moment.
See step 9. Tighten the M6 Nylon Locknuts (45).
11. Identify the Left Pedal (24), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal
counterclockwise
into the Left Crank Arm
(42). Tighten the Right Pedal (not shown)
clockwise
into the Right Crank Arm (not shown) in the same
way. Important: Tighten both Pedals as firmly as
possible. After using the crosstrainer for one
week, retighten the Pedals. For the best perfor-
mance, the Pedals must be kept properly tightened.
Adjust the Left Pedal Strap (25) to the desired position
and press the end of the Strap onto the tab on the Left
Pedal (24). Adjust the Right Pedal Strap (not shown)
in the same way
.
16
Batteries
Battery
Drawer
10
11
24
Tab
42
25
15
9. Attach the Left Handlebar Bracket (88) to the Upright
(13) with two M6 x 32mm Button Screws (83) and two
M
6 Nylon Locknuts (45). Attach the Right Handlebar
Bracket (95) to the Upright (13) in the same way. Do
n
ot tighten the Nylon Locknuts yet.
Slide the Handlebar Collar (77) onto the Left
Handlebar (11). Insert the Right Handlebar (15) into
the Handlebar Collar. Connect the Handlebar Collar,
the Left Handlebar, and the Right Handlebar with an
M4 x 16mm Screw (73).
Attach the Left Handlebar (11) to the Left Handlebar
Bracket (88) with two M8 x 12mm Button Screws (94).
Attach the Right Handlebar (15) to the Right
Handlebar Bracket (95) in the same way.
9
13
77
73
88
11
45
83
94
95
94
9
4
45
83
Screw
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 764HR - PFEVEX6104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 764HR - PFEVEX6104 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 764HR - PFEVEX6104

Pro-form 764HR - PFEVEX6104 User Manual - German - 24 pages

Pro-form 764HR - PFEVEX6104 User Manual - Dutch - 24 pages

Pro-form 764HR - PFEVEX6104 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info