554135
5
Zoom out
Zoom in
Previous page
1/24
Next page
5
1. Whilst another person lifts the front of the Frame (1),
attach the Front Stabiliser (2) to the Frame with two
M
10 x 112mm Carriage Bolts (65) and two M10 Black
Nylon Locknuts (63).
Make sure that the Front
S
tabiliser is turned so the Wheels (30) are not
touching the floor.
2
63
30
3
0
6
5
1
1
2. Orient the Frame Rail (3) as shown, with the hexago-
nal holes in the indicated position. Insert the end of the
Frame Rail into the Stabiliser Covers (7, 8) as shown.
Attach the Stabiliser Covers with two M10 x 45mm
Button Screws (74).
3
3
7, 8
7, 8
74
3. Orient the Seat Carriage (4) as shown. Locate the
Knob (not shown) on the Seat Carriage, and turn the
Knob counterclockwise until it is loose. Next, pull the
Knob, slide the Seat Carriage onto the Frame Rail (3),
and then release the Knob. Move the Seat Carriage
back and forth slightly until it locks into position.
Then, tighten the Knob.
Slide the Frame Rail (3) onto the indicated round tubes
on the Frame (1). Attach the Frame Rail with two M10
x 52mm Zinc Button Bolts (68), two M10 Zinc Split
Washers (93), two M10 Zinc Washers (85), and two
M10 Zinc Nylon Locknuts (66).
Set the six Hand W
eights (not shown) on the Stabiliser
Covers (7, 8) as shown on page 3.
4. With the help of a second person, slide the Backrest
Frame (5) onto the top of the Seat Carriage (4). Next,
slide the bracket on the Seat Frame (6) over the
rounded brackets on the Backrest Frame. Align the
indicated holes in the Seat Frame, the Backrest
Frame, and the Seat Carriage, and insert the 1/2” x
70mm Button Bolt (51) into the holes.
Then, tighten the
1/2” Nylon Locknut (52) onto the Bolt.
Pivot the Backrest Frame (5) up until it is nearly vertical.
Insert the Adjustment Pin (29) into the lowest hole in
the rounded brackets on the Backrest Frame and
through the corresponding hole in the Seat Carriage (4).
6
5
51
4
29
4
2
68
85
93
Align
these
holes
52
3
1
66
Knob
Hexagonal
Holes
4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 764HR - PFEVEX6104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 764HR - PFEVEX6104 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 764HR - PFEVEX6104

Pro-form 764HR - PFEVEX6104 User Manual - German - 24 pages

Pro-form 764HR - PFEVEX6104 User Manual - Dutch - 24 pages

Pro-form 764HR - PFEVEX6104 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info