553943
13
Zoom out
Zoom in
Previous page
1/36
Next page
13
The lower right corner
of the display will show
t
he distance that you
have walked or run, the
e
lapsed time, your
pace (in minutes per
mile), and the speed of the walking belt. Note:
When a program is selected (except for pulse pro-
gram 2), the lower right corner of the display will
show the time remaining in the program instead of
the elapsed time.
The center of the dis-
play is the priority dis-
play. Press the Display
(DISP.) button repeat-
edly until the priority
display shows the in-
formation that you most want to view. Note: While
information is displayed in the priority display, the
same information will not be displayed in the lower
left or right corner of the display.
Note: The console can display speed and dis-
tance in either kilometers or miles. A “Km/H” will
appear in the right side of the display when the
console is displaying speed and distance in kilo-
meters. To change the unit of measurement, see
THE INFORMATION MODE on page 23.
Note:
For simplicity, all instructions in this section
refer to kilometers.
To reset the display, press the Stop button, re-
move the key, and then reinsert the key.
Measure your heart rate if desired.
Note: If you
use the hand-
grip pulse sen-
sor and the
chest pulse
sensor at the
same time, the
console will not
display your heart rate accurately. Before using
the handgrip pulse sensor, remove the sheets of
c
lear plastic from the metal contacts. In addition,
make sure that your hands are clean.
Next, hold the handgrip pulse sensor with your
palms resting on the metal contacts;
avoid mov-
ing your hands. When your pulse is detected, the
heart symbol in the lower left corner of the display
will appear, one or two dashes will appear, and
then your heart rate will be shown. For the most
accurate heart rate reading, continue to hold
the contacts for about 15 seconds.
Turn on the fan if desired.
To turn on the fan, press the Fan button. To turn
on the fan at high speed, press the button a sec-
ond time. To turn off the fan, press the button a
third time. Note: If the fan is left on when the walk-
ing belt is stopped, the fan will automatically turn
off after a few minutes.
When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest setting
when the treadmill is folded to the storage posi-
tion or the treadmill will be damaged. Next, re-
move the key from the console and put it in a se-
cure place. Note: If the display remains lit after
the key is removed, the console is in the
“demo” mode. See page 23 and turn off the
demo mode.
When you are finished using the treadmill,
switch the on/off switch to the “off” position
and unplug the power cord.
8
7
6
Contacts
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-form 500 CX - PETL41106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-form 500 CX - PETL41106 in the language / languages: English as an attachment in your email.

The manual is 3,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pro-form 500 CX - PETL41106

Pro-form 500 CX - PETL41106 User Manual - German - 36 pages

Pro-form 500 CX - PETL41106 User Manual - Dutch - 36 pages

Pro-form 500 CX - PETL41106 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info