712774
15
Zoom out
Zoom in
Previous page
1/16
Next page
15
EN
CLEANING AND MAINTENANCE
Disconnect the appliance from the power supply.
Do not use steam cleaning equipment.
Do not use abrasive sponges or scouring pads as
they may damage the glass.
After each use, clean the hob (when it is cool) to
remove any deposits and stains from food residue.
Use a scraper only if residues are stuck to the hob.
Follow the scraper manufacturers instructions to
avoid scratching the glass.
Sugar or foods with a high sugar content can
damage the hob and must be immediately
removed.
Salt, sugar and sand could scratch the glass
surface.
Use a soft cloth, absorbent kitchen paper or a
specific hob cleaner (follow the Manufacturer’s
instructions).
Spills of liquid in the cooking zones can cause the
pots to move or vibrate.
After cleaning the hob, dry thoroughly.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
F0 Electronic error Disconnect and reconnect the power supply. If the error persists,
call after-sales support.
Fc Electronic control overheated, the cooking
zones are switched o.
Wait until the temperature is lowered. The cooking hob will start
working again when the temperature returns to normal.
Ft / FE Electronic temperature sensor may be
damaged.
Wait until temperature is lowered. If the message persists even
after the value returns to room temperature, call the after-sales
support.
Fb Excessive key sensitivity. Check that the glass-ceramic work top has been installed
properly.
Call after-sales support to make sure that keys touch the glass
surface correctly.
FU / FJ / FA / FC / Fd Touchpad error, this error is an automatic
keypad check. It will disappear when the
automatic check is reset to the correct
value.
If the error persists, contact the after-sales support.
Fr Relay error, there may be a problem with
one of the relays.
Disconnect the power supply, wait one minute and switch on
again. If the error persists, call after-sales support.
SAFETY SHUTDOWN
In the event that one or more cooking areas is
inadvertently left on, the safety system will shut the
zones down automatically after a certain time has
elapsed. The letter “H” will be displayed below.
IMPORTANT
To avoid a permanent damage the hob: do not use
pots with bottoms that are not flat; do not use metal
pots with enamelled bottom; do not place hot pots/
pans over the control panel.
You can download the safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website - docs.whirlpool.eu
Using QR code
Alternatively,
contact our After-sales Service (see phone number in the warranty
booklet). When contacting our After-sales Service, please state the codes provided on
your products identification plate.
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXX
Made in X
Type: XXX Mod.: XXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
400011392013
Printed in Italy
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PCTAC 3040 NE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PCTAC 3040 NE in the language / languages: German as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info