712774

Privileg PCTAC 3040 NE Manual

14
Zoom out
Zoom in
Previous page
1/16
Next page
14
DAILY USE
SWITCHING ON THE DEVICE
Press the key to activate the control: the
adjustment level indicators show “0” and a power-on
LED appears above the first key.
Perform the next operation within 10 seconds, otherwise the
device will switch o automatically.
SET POWER AND TIMER
Use the “+” and “-” keys to adjust the setting of
the plates and the required time on timer/minute
counter.
The “+” and “-” controls are common to both
functions. Accordingly, to regulate the power of the
hob, first select the zone with key (4, 6), then adjust
the relative power level using the “+” and “-” keys;
once done, select the timer function and proceed to
set the duration, likewise using the “+” or “-” keys.
SWITCHING ON THE COOKING AREA
Once the device has been activated, switch on the
cooking area (within 10 seconds) as follows:
• Press one of the keys to select the cooking area
required. The related display gets brighter.
• Use the “+” and “-” keys to adjust the heating level
(from 1 to 9-P).
Pressing button “+” when level 9 is reached, the “Booster”
function is activated and the letter “P” appears on the display.
• Press and hold down these keys to increase or
decrease the setting.
SWITCHING OFF THE COOKING AREA
The requested cooking zone must be activated and will,
therefore, be brighter.
Return the setting to “0”, by means of the key “-”.
RAPID SHUTDOWN OF THE COOKING AREA
• Select the cooking zone to turn off.
• Press and hold “-” and “+” at the same time.
DOUBLE RADIANT COOKING ZONE
On a double cooking zone, one zone or both (central
crown/extended-crown) can be switched on.
» TURNING ON A DOUBLE ZONE
After selecting the power level, greater or equal to 1,
the double circuit areas are enabled by pressing the
cooking zone key again.
Only for this type of heating plate, horizontal dashes
light up to indicate how many circuits are turned on.
Two horizontal dashes indicate that all the two resistors are
turned on in the selected heating element.
» TURNING OFF A DOUBLE ZONE
The requested cooking zone must be activated and will,
therefore, be brighter.
When you touch again the selection key, one circuit
at a time is turned off.
If you continue to press the selection key
intermittently, the plates are turned on and off.
RESIDUAL HEAT INDICATOR “H”
If the temperature of the cooking area is still high
(and a burn risk is still present) after it has been
switched off, the display related to the zone will
indicate the letter “H” (residual heat).
The letter H will only disappear when the burn risk is no
longer present (approximately 60°C).
SWITCHING OFF THE HOB
The hob can be switched off at any time by pressing
the ON / OFF icon (
).
LOCK THE CONTROL PANEL COMBINATION KEY
The hob can be locked with a combination of keys.
Turn on the cooking surface and then press key “-”,
holding it down, press the select key on the left: L’s
appears.
The purpose of this lock is to prevent unintended
operations. While the lock is engaged, all operations
of the keys are unabled, with the exception of the
OFF key.
To unlock the hob, perform the same operation: turn
on the surface, press the minus key and press the
selection key to the left. The L’s disappears.
TIMER FUNCTION
This function simplifies cooking operations: once the
set time on the timer has elapsed, the cooking area is
automatically switched off.
» TURNING THE TIMER ON
1. The cooking zone must be activated.
2. Select a power level between 1 and 9.
3. Touch the timer key (9): the timer display
shows “00” and the cooking zone decimal point is
highlighted.
4. Select the cooking time (between 0 to 99 minutes)
by means of the “+” and “-” keys (8). The timer
function will automatically start within a few seconds
and a flashing “t” will appear on the zone with the
shortest timer setting.
The decimal point of the cooking zone with timer
setting remains highlighted with the shortest timer
setting. The timer will start up automatically in a few
seconds. Press and hold down the “+” or “-” key to
scroll the time setting.
The timer function can be applied to all the cooking zones by
selecting them.
» TURNING THE TIMER OFF
When the set time has elapsed, an acoustic signal is
emitted for two minutes.
To silence the signal, press any key.
To interrupt the timer, proceed as follows:
1. Press the timer key (5).
2. Press the “-” key to reset the time.
… 14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PCTAC 3040 NE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PCTAC 3040 NE in the language / languages: German as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info