491612
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
Note:
Do not allow steamer to run dry.
Do not unscrew the plastic nut during using.
Do not aim the steam nozzle at anyone, the steam is very hot.
Be careful when handling garments on the clothes hanger hook. Pulling on the garment with too much
force may cause the unit to overturn.
Do not touch silk or velvet with steam nozzle
Only use easy-roll casters for mobility during operation, but not the handle of unit.
RESET TIMER
There is an inner timer to preserve the total operating time of the appliance. After every 30 hours of use,
the ‘TIME TO CLEAN’ indicator light illuminates with 5 beep sounds each time you turn on the unit.
Now you have to reset the timer. Press the buttons
and at the same time for 3 seconds. There is a
long beep and the timer reset is finished.
CLEANING AND STORAGE:
We recommend you follow this procedure at least once a week.
1. After using the steamer, switch the unit off (the power indicator light will go out)
2. Unplug the unit from the outlet.
3. Allow the steamer to cool for at least 30 minutes.
4. Remove the hose and shorten the hanger rod, then set them aside.
5. Remove and drain the water tank. Rinse the water tank with fresh water, and drain completely.
Place the water tank back on the water reservoir.
6. Drain the vertical steamer by removing the drain cap and emptying the contents.
7. Flush the water reservoir and the hose with fresh water, and drain completely. Replace the drain cap.
8. Wrap the hose around the hanger rod and place the steam nozzle on the rotatable hanger.
9. Clean the hand protection plate, hard sofa brush, lint brush, fabric brush, pant press and rotatable
hanger in soapy water. Dry well. Store in accessory box. See fig 11.
10. Wipe the outside of unit with a wet cloth.
11. Rewind the plug by pressing the cord rewinder foot-step.
12. Store in a cool, dry place.
Note: Do not immerse the base in water or other liquids.
REMOVING MINERAL BUILD-UP:
One common problem with steamer is mineral build-up caused by high mineral levels in
many municipal water supplies. Mineral residue inside the internal pipes and heater can
cause intermittent steaming or, in some cases, no steaming at all. According to the water
quality in different regions, we advise you to remove the mineral build-up after using for
7-15 days. Please take note of the following procedure.
fig. 9 fig. 10
fig. 11
8


Need help? Post your question in this forum.

Forumrules
1

Forum

princess-332832-vertical-steamer-pro

Reset search

  • The steamer suddenly stops producing steam after a very short time Submitted on 3-7-2022 at 17:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Princess 332832 Vertical Steamer Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Princess 332832 Vertical Steamer Pro in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info