491612
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
LEARN ABOUT CONTROL PANEL
The control panel comes with a power indicator light, a ‘TIME TO CLEAN’ indicator light, a LED,
standby/L/H/Turbo indicator lights, left button and right button. See fig 8
Insert the plug into wall socket and turn on the unit by using your foot to press the ON/OFF foot-step.
The unit makes a beep sound. Meanwhile, the power and ‘Turbo’ indicator lights illuminate. The LED
displays number ‘4’. The steamer is running and will produce steam in around 35 seconds.
The vertical steamer has four steam levels: standby(steam level 1), L(steam level 2), H(steam level 3)
and Turbo(steam level 4). You can use buttons
or to set the steam level. The number on the LED
will change with a short beep accordingly when you push the
or button.
After operating for 30 hours in total, ‘TIME TO CLEAN’ indicator light illuminates.
USE WITH STEAM:
1. Place the vertical steamer on a flat, stable surface/floor.
2. Pull the power cord out and plug into a proper voltage outlet. Push cord rewinder foot-step to rewind
power cord.
3. Use your hand or foot to push ON/OFF switch to activate the unit. The power indicator light and
‘Turbo’ indicator light illuminate. The LED will display number ’4’ (the default steam level is level 4).
Use buttons
or to set your desired steam level. It takes around 30 seconds before the steam emits
from steam nozzle.
Note: Do not switch the steamer on if there is no water in water tank because it may overheat. It is
normal to hear a gurgling sound from the steamer while the heater starts to create steam, or when
condensation builds up. If this occurs during operation, just position the steam nozzle upright to allow
the excess condensation to drain back into steamer.
4. To steam a garment, place it on a clean and rust-free clothes hanger and use the clothes hanger hook,
or hang the garment on the folding rack directly.
5. Grasp the handle of steam nozzle, and place the steam nozzle at the bottom of the garment.
Steam will rise along the inside and outside of the fabric, removing wrinkles. Slowly
slide the steam nozzle vertically, from the bottom to the top of the garment. See fig 9.
6. Move the steam nozzle from the bottom to the top of the garment, and smooth the fabric
with the other hand.
7. Repeat steps 2 and 3 as necessary until the fabric is free of wrinkles.
8. Curtains and draperies can be steamed while still hanging. See fig 10.
9. Heavier fabrics may require repeated steaming.
10. To remove stubborn wrinkles, the fabric brush may also be used.
11. Hang the steam nozzle in an upright position on rotatable hanger when not in use.
12. Switch off the appliance and remove the plug from socket after use.
fig. 7
fig. 8
7


Need help? Post your question in this forum.

Forumrules
1

Forum

princess-332832-vertical-steamer-pro

Reset search

  • The steamer suddenly stops producing steam after a very short time Submitted on 3-7-2022 at 17:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Princess 332832 Vertical Steamer Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Princess 332832 Vertical Steamer Pro in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info