722002
24
Zoom out
Zoom in
Previous page
1/30
Next page
24 Sundancer
Figure 13. Unplug the Rear Light Harness Figure 14. Unplug the Front-to-Rear Connector
No tools are required to disassemble or assemble your Sundancer. Always disassemble or assemble your Sundancer
on a level, dry surface with sufficient room for you to work and move around your Scooter. Keep in mind that the
disassembled sections of your Scooter take up more floor space than the assembled Scooter.
VIII. DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
You can disassemble your Sundancer into seven or eight pieces: the seat, the front frame, the front basket, the rear
frame, the rear shroud, and the two batteries; you can also remove the utility tray from the rear frame, if necessary.
Place your Scooter in an area where you have sufficient clearance to move the parts around. You need approximately
1.5 meters in all directions. You may need assistance to lift some of the Scooter components. See III. Specifications
for individual component weights.
1. Place the freewheel lever in the drive (down) position.
2. Ensure the seat is locked into position, then lift the seat up and off of your Scooter.
3. Gently lift the rear shroud off of your Sundancer. If your Scooter is equipped with rear lights, you will not be
able to fully remove the rear shroud until you perform step 4.
4. Unplug the rear light harness, if so equipped. See figure 13.
5. Unplug the large, white front-to-rear connector that attaches the front control console harness to the utility tray.
See figure 14.
6. Disconnect the battery tie-down straps, unplug both battery harnesses, and lift both batteries off of the Sundancer.
See figures 15 and 16.
CAUTION! Failure to unplug both battery harnesses and the control console harness prior to
disassembly could result in permanent damage to your Sundancer.
7. If you plan to remove the utility tray, disconnect the 6-pin motor harness plug. See figure 17. If you do not plan
to remove the utility tray, go to step 10.
NOTE: You can decrease the weight of the rear component by removing the utility tray.
8. Lift up and remove the utility tray (optional) if you want to decrease the weight of the rear component.
9. Pull up on and remove the front basket.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Sundancer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Sundancer in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info