793185
32
Zoom out
Zoom in
Previous page
1/124
Next page
32 Travel Scooter Series
V I . D I S A S S E M B LY A N D A S S E M B LY
DISASSEMBLY
You can disassemble the Travel Scooter into several pieces: the seat, the under-seat storage, the rear section, the front
section, the basket, the battery pack, and the battery shroud (models 83 and 84 only). See gure 31. No tools are
required to disassemble or assemble your Travel Scooter. Always disassemble or assemble your Travel Scooter on a
level, dry surface with suffi cient room for you to work and move around—about 5 feet (1.5 meters) in all directions.
Remember that some Travel Scooter components are heavy and you may need assistance when lifting them.
WARNING! Do not lift weight beyond your physical capability. Ask for assistance when necessary
while disassembling or assembling your Travel Scooter.
WARNING! Do not pick up the seat frame or scooter by the armrests. They are free to pivot, and
you may lose control of the seat if they do so.
IDENTIFICATION KEY
* Indicates
Lifting Points
1. Seat
2. Under-seat Storage
3. Rear Section
4. Front Section
5. Basket
6. Battery Pack
7. Battery Shroud
DISASSEMBLY PROCEDURES - MODELS 29, 36, 336, 83, AND 84
To disassemble your scooter:
1. Remove the key from the key switch.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob
in and turning it clockwise 90°. See gure 32. The front wheel must face
forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the Travel Scooter. If you
encounter resistance when removing the seat, disengage the seat rotation
lever and swivel the seat back and forth while lifting up on the seat.
4. Remove the rear shroud by lifting it straight up and off of the Travel Scooter.
(Models 83 and 84 only).
5. Disconnect the battery harness. See fi gure 22.
6. Disconnect the front-to-rear harness. See gure 22.
7. Disconnect the battery tie-down strap. (Models 83 and 84 only). See gure 22.
8. Remove the battery pack from the Travel Scooter by lifting it straight up
and off of the Travel Scooter. Figure 32. Tiller Lock Knob
DISASSEMBLY PROCEDURES - MODELS AAP4, 39, 40, 44, 40LX, 40X, 44X, 40E, 44E, 44LX, 49,
50LX, 50LXLIT, 53, 53HD, 54, 54LX, 54LXLIT, 54HD, 66, 67, 73, 74, AND JAZZY ZTS
To disassemble your scooter:
1. Remove the key from the key switch and then lock the tiller in the straight ahead position by pushing the tiller lock
knob in and turning it clockwise 90°. See gure 32. The front wheel must face forward in order to lock the tiller.
2. If equipped, remove under-seat storage. See Figure 28.
3. Remove the seat by lifting it straight up and off of the Travel Scooter. If you encounter resistance when removing
the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.
4. Remove the battery pack by lifting the pack straight up and off of the Travel Scooter.
NOTE: Please check the Travel Scooter Features Table on the inside of the front cover to determine if your
Travel Scooter has a frame release lever or a lock-up pin before attempting to separate the frame.
Figure 31. Disassembled Travel Scooter
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Go Go Endurance at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Go Go Endurance in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Go Go Endurance

Pride Go Go Endurance User Manual - German, Dutch, Italian - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info