668252
16
Zoom out
Zoom in
Previous page
1/32
Next page
16
To install the positioning belt:
1. Remove the rearmost screw that holds the under-seat storage (see fi gure 4)hinge to the seat base
on both the left and right seat hinges.
2. Insert the screw through the supplied washer, through the positioning belt and into the seat base for
each side of the travel chair seat.
3. Tighten both screws.
To adjust the positioning belt:
1. Once seated, insert the metal tab on one side of the belt into the plastic housing on the opposite side
until you hear a click. See fi gure 13.
2. Pull the excess strap attached to the metal tab until it is secure, but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning belt is properly secured to the travel chair and
is adjusted for operator comfort before each use.
MANDATORY! Inspect the positioning belt for loose parts or damage, including tears,
worn spots, bent hardware, damaged latch mechanisms, dirt or debris, before each use
of the travel chair. If you discover a problem, contact your authorized Pride Provider.
Positioning Belt
Your Go-Chair may be equipped with a positioning
belt that can be adjusted for operator comfort.
See fi gure 13. The positioning belt is designed to
support the operator so that he/she does not slide
down or forward in the seat. The positioning belt is
not designed for use as a restraining device.
WARNING! The positioning belt is
not designed for use as a seat belt
in a motor vehicle. Nor is your travel
chair suitable for use as a seat in
any vehicle. Anyone traveling in a
vehicle should be properly belted
into seats approved by the vehicle
manufacturer.
WARNING! The positioning belt
should be secured at all times. Never
allow the positioning belt to hang or
drag on the oor as it may become
entangled.
1
Figure 13. Positioning Belt Adjustment
Identifi cation Key
1. Positioning Belt
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Go-Chair at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Go-Chair in the language / languages: English as an attachment in your email.

The manual is 7,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Go-Chair

Pride Go-Chair User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info