Manual Pride Colt Deluxe 2.0 (page 26 of 44) (English)

722005

Zoom out

Zoom in

1/44

Mid-size Scooter Series

V. COMFORT ADJUSTMENTS

TILLER ANGLE ADJUSTMENT (See figure 14)

WARNING! Remove the key from the key

switch before adjusting the tiller or the seat.

Never attempt to adjust the tiller or the seat

while the scooter is in motion.

NOTE: In order to fully lower the tiller for purposes of

disassembly or transport, you must first completely remove

the seat. See VI. “Disassembly and Assembly.”

MIRROR POSITION

To install the mirror (see figure 1, 2 or 3):

1. Determine on which side to install the mirror and remove

the rubber plug from the top of the tiller handle.

2. Insert the threaded end of the mirror holder into the open-

ing and rotate it clockwise until snug.

3. If necessary, rotate the nut clockwise to secure the mirror

in place.

To adjust the mirror:

1. Position yourself in a seated driving position facing

forward.

2. Adjust the mirror left, right, up or down until you have a

good line of sight behind you.

SEAT ADJUSTMENTS

Note: The seating adjustments explained in this section

depend on the type of seat on your scooter. Please refer to

the Scooter Features Table to determine which options

apply to your specific seat type.

Armrest Width Adjustment

Your seat type may be equipped with an armrest width

adjustment feature. The seat arms can be adjusted inward or

outward.

1. Loosen the armrest adjustment knobs. See figure 15.

2. Use the attached ring to pull and remove the detent pins.

3. Slide the armrests in or out to the desired width.

4. Align the adjustment holes on the seat frame and armrest,

then reinsert the detent pin.

5. Tighten the armrest adjustment knobs.

Figure 14. Tiller Adjustment Knob - Two

Variations

Figure 15. Seat Adjustments – Style A

IDENTIFICATION KEY

1. ARMREST ADJUSTMENT KNOBS

2. DETENT PINS

3. SEAT ROTATION LEVER

I bought a 'new' Pride Colt Deluxe 2.0. Later I discovered that both Track Rods where they fit on the Track Rod Ends as best as I could see has some play in them. I rang up the Shop who supplied it, & they sent someone out with a Tie Rap, & then put one on each of them to hold them firmly together. My question is, is this standard procedure when dealing with Mobility Scooters, or are they manufactured 'disabled' to be like the Owner ? Submitted on 3-10-2024 at 20:35
Reply Report abuse
Console shows three green lights are out while charger is flashing fully charged Submitted on 15-10-2023 at 15:01
Reply Report abuse
How do I enable the scooter to go from pushing to driving mode? Submitted on 1-7-2023 at 19:42
Reply Report abuse
Why is my suspension on my pride deluxe Colt so tight Submitted on 21-9-2021 at 11:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Deluxe 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pride Colt Deluxe 2.0 Manual

Product: