604329
67
Zoom out
Zoom in
Previous page
1/87
Next page
TRM 400 Series Assembly Guide 6
Assembling the Frame
To assemble the frame:
1. Remove the hood, by loosening the two front fasteners and two
side fasteners on the hood using the ³₁₆-inch hex wrench.
Figure 4: Locations of hood fasteners
2. Lift the hood and set it aside.
Figure 5: Remove the hood
3. Position the left upright support onto the base frame side bracket.
Note: The left upright support has a large hole on the inner side of it.
4. Ask your assistant to help you line up the mounting holes and secure the
upright support using four ⁵₁₆-inch x ³₄-inch socket head screws, two in the
side mounting holes and two in the front mounting holes. Partially tighten all
four screws.
Figure 6: Upright support attachment
5. Repeat steps 3 and 4 to attach the right upright support using the four
remaining ⁵₁₆-inch x ³₄-inch socket head screws and partially tighten.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor TRM 425 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor TRM 425 in the language / languages: English as an attachment in your email.

The manual is 7,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info