604355
7
Zoom out
Zoom in
Previous page
1/108
Next page
536i Elliptical Fitness CrossTrainer Assembly Guide 5
Assembly Steps
Remove the packaging around the ramp support covers.
Grasp the magazine rack at its base and slide it up and off the
front ramp support cover. Set it aside.
Use a long-handle ⁵⁄₃₂-inch hex key to remove the four
fasteners that secure the front ramp support cover. Set the
fasteners aside.
A tab on each side of the front ramp support cover holds the
front and back covers together. Gently squeeze the sides of
the back covers to release the tabs. Remove the front ramp
support cover.
While holding the foam pouch in place, ask your assistant to
lift and hold the ramp while you position the lift motor
assembly and slide the yoke into the ramp.
Note: The foam pouch has been placed over the end of the
ramp to avoid scratches to the cover. The pouch will be
removed once the stabilizers are attached and secure.
Secure the base of the ramp support assembly using two hex
head screws (A), two split washers (E), and two washers (B).
Finger tighten.
Secure the ramp to the yoke using two buttonhead
screws (C), two washers (D) and two locknuts (G).
Wrench tighten using the ⁷⁄₃₂-inch hex key and a ⁹⁄₁₆-inch
socket wrench.
Return to the base of the ramp support assembly and wrench
tighten the two fasteners using a ½-inch socket wrench.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor EFX 536I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor EFX 536I in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info