604302
73
Zoom out
Zoom in
Previous page
1/83
Next page
EFX 200 Series Assembly Guide 12
Adjusting the Ramp (EFX Models 222 and 221
Only)
The EFX ramp incline can be set to one of three positions: Low (15 degrees),
Medium (20 degrees), or High (25 degrees). If you are on the equipment,
dismount. To adjust the ramp, you can straddle the equipment with one foot on
either side or stand to one side of it.
CAUTION: To adjust the ramp, you must be standing on the floor. You cannot be
standing on the equipment or the foot pedals. Be aware of the position of the handrails
and console when you are adjusting the ramp. Be careful not to bump your head on the
console when you stand up.
To adjust the ramp:
1. Place one hand under the front of the ramp and one hand on the lever. Pull the
front of the ramp up and toward you while pulling the lever back and up. This
releases the ramp for adjustment.
Figure 24: Ramp adjustment
2. Carefully adjust the ramp to the desired height.
Important: Before releasing your grip, test the ramp by gently pushing it down with
your hands to make sure that it has securely clicked into one of the incline positions.
The ramp should not move when tested.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor EFX 225 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor EFX 225 in the language / languages: English as an attachment in your email.

The manual is 7,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info