691234

Precor C934 Manual

45
Zoom out
Zoom in
Previous page
1/60
Next page
page 45
COMMERCIAL PRODUCTS DIVISION
HEART RATE COURSE
Once the user sets a target heart rate and the running belt’s speed, the C934
Heart Rate Course monitors the user’s heart rate and automatically maintains it
within a few beats per minute (bpm) of the selected target. Blinking lights on the
SmartRate
®
bar graph appear to show the “zone” that the user is in.
Note: For the C934 to detect a heart rate, the user must wear the POLAR
®
chest
strap or hold onto both touch-sensitive grips on the handrails. The POLAR
®
chest
strap is optional equipment that can be purchased from your dealer.
To use the Heart Rate Course, have the user follow the steps found in
Quick
Steps to Working Out
on page 37 and choose HRC at the COURSE prompt. For
the Heart Rate Course to operate properly, a user’s AGE
must
be entered during
the Setup prompts. Once the user addresses the remaining Setup prompts, the
following occurs:
• The software verifies that it detects a heart rate signal. You need to press
the SPEED ▲ key to begin working out.
Note: If a user’s heart rate cannot be detected (or transmitted through the
POLAR
®
chest strap or touch-sensitive grips), the letters “Hr” blink in the
heart rate display. Once a heart rate is detected the number that corre-
sponds to the user’s heart rate appears.
• The treadmill provides a three-minute warm-up period before entering the
Heart Rate Course. During this time, the user may make changes to the
incline by using the INCLINE ▲▼ keys. He or she can press the SPEED
▼▲ keys to set the running belt’s speed.
Note: If the user’s heart rate moves into his or her heart rate zone during the
three-minute warm-up period, the Heart Rate Course begins concurrently.
• After the warm-up period, the treadmill automatically adjusts the incline to
keep the user’s heart rate at the selected target. The SmartRate
®
display
indicates which zone: cardiovascular or weight loss, that the user is in.
Note: A user can change the running belt’s speed anytime during a work-
out, but doing so affects the treadmill’s ability to maintain the target heart
rate. It takes time for the treadmill to readjust the incline so that the user’s
heart rate remains on target.
CAUTION: A warning message appears if the user goes above his or her
maximum recommended heart rate target zone. Heed the warning. Make
sure that the user has permission from his or her personal physician
before working out above the maximum recommended zone for his or her
age and fitness level. See Diagram 22 on page 42 for the recommended
target zones.
• When a user reaches the time limit, a cool-down period begins. The user
can override the speed and incline by pressing the appropriate ▼ or ▲ keys.
Note: The speed remains constant, if the user was at or below 0.5 mph (1.0 kph).
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor C934 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor C934 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info