691234
34
Zoom out
Zoom in
Previous page
1/60
Next page
page 34
COMMERCIAL PRODUCTS DIVISION
QUICKSTART: This key lets the user bypass the Setup prompts and start work-
ing out immediately using the Manual course.
Default values apply.
QUICKSTART Default Values
Prompts Default Value
COURSE Manual
TIME Club dependent (usually 30 minutes - see page 25.)
WEIGHT 150 lbs. (68 kg.)
AGE 0 : A valid AGE must be entered to utilize the SmartRate
®
display. If QUICKSTART is pressed
after
an AGE
is entered,
then the SmartRate display will appear when a user wears the
POLAR
®
chest strap. If no AGE
entry occurs, then SmartRate
LED’s light, but are not activated. Note that the POLAR
®
chest
strap is available through a Precor dealer. Refer to
Obtaining
Service
on page 7.
The QUICKSTART key can be pressed any time during the Setup prompts.
For more information, refer to page 30,
The Setup Mode and the QuickStart
Feature
.
ENTER: Workout specific prompts which appear on the display need to be addressed
and then “entered” into the unit's memory by pressing the ENTER key. Refer to
Quick Steps to Working Out
on page 37.
SPEED ▼▲: During a workout, the SPEED keys let the user decrease or increase
the running belt’s speed. The display can show a range from 0.5 to 11 miles per
hour (1 to 18 kilometers per hour) and changes can be made in 0.1 increments
from 1 to 11 mph (1 to 18 kph). The display indicates a speed of “0” when a user
presses the SPEED key to stop the running belt.
Any time during a workout, the user can view the actual speed by lightly tapping
either SPEED or key. His or her “pace” (minutes per mile or kilometer)
appears in the left-most portion of the display. To change the speed, a user can
hold the key down for more than two seconds.
During Setup mode, the SPEED ▼▲ keys are used for data selection. Pressing
either or key changes what appears on the display, but does not affect the
speed of the running belt. Refer to
Setup Mode and Prompts
on page 29.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor C934 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor C934 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info