page 32
COMMERCIAL PRODUCTS DIVISION
CALORIES: Provides the cumulative number of calories being burned by the user.
INCLINE: Displays the selected percent of incline during a workout. The INCLINE
▲ and ▼ keys affect the treadmill’s lift and let the user set an incline between 0
percent and 15 percent. The displayed values change in 0.5 percent increments.
Refer to INCLINE ▲▼ keys on page 33.
When the INCLINE field is selected and the target incline changes from the actual
incline (as in a preprogrammed course), the target incline appears in the display. It
continues to be displayed as the lift moves to the new incline level. A few seconds
after the lift reaches the requested incline, the display no longer appears.
Note: To check the incline (when it is not the chosen display) any time during a
workout, lightly press either INCLINE ▲ or ▼ key for less than two seconds. If a
user presses the INCLINE ▲ or ▼ key for more than two seconds, the treadmill’s
incline will change.
COURSE PROFILE: At the beginning of a course, the profile appears on the
right side of the display and corresponds to the course that the user selected. As
the user proceeds through his or her workout, the position in the course is indi-
cated by a blinking column. The height of the column indicates the level of incline.
Every time the incline changes by several sequential levels (up or down) the
height of the column changes by one cell.
CALORIES PER MINUTE: Indicates the approximate number of calories being
burned per minute.
METS: Displays the metabolic equivalents associated with a user’s current energy
expenditure level. A METS level of 1 represents the body at rest. Note that when
the running belt stops moving, the METS value displays zero.
SPEED: Displays the running belt’s speed. The running belt speed ranges from
0.5 to 11 mph (1 to 18 kph), but a maximum speed can be set by the club (see
Club Information
on page 23). The SPEED ▼▲ keys let a user decrease or
increase the running belt’s speed in 0.1 increments.
Important: To check the speed (when it is not the chosen display) any time
during a workout, the user can lightly press either SPEED
▼
or
▲
key (for less
than two seconds). The running belt’s speed appears in the right portion of the
display. If a user presses the SPEED
▼
or
▲
key for more than two seconds, the
treadmill’s speed will change.
PACE: Displays the user’s target speed in minutes and seconds per mile (or kilome-
ter). The user’s pace appears in the TIME field when the SPEED indicator is
not
lit and
the user taps the SPEED ▼ or ▲ key.