Manual Precor 240I Stretch Trainer (page 17 of 32) (English)

604343

Zoom out

Zoom in

1/32

Assembling the StretchTrainer 15

3. To attach the knee pad, slide a washer onto each of the

four bolts removed in step 1. Place a bolt and washer on

the end of the 6mm hex wrench and insert it through the

crossbar.

4. To keep the knee pad properly aligned, thread all four

bolts, then alternately tighten each bolt securely.

Note: If you lose a bolt in the crossbar, tip the seat frame

on its side and shake it until the bolt drops out of the hole.

Figure 8: Knee pad attachment

To attach the axle:

1. Position the seat frame between the seat bracket and

align the axle mounting hole. Slide the axle half way

through the bracket and seat frame.

Figure 9: Axle placement

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Precor 240I Stretch Trainer in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Precor 240I Stretch Trainer Manual

Product: