Manual Precor 240I Stretch Trainer (page 18 of 32) (English)

604343

Zoom out

Zoom in

1/32

16 Assembling and Maintaining the StretchTrainer

2. Slide a foot rest onto one end of the axle.

3. Position an E-clip from the hardware kit on the foot rest as

shown in the following figure and push it into position.

Note: A notch has been cut into the axle to position the

E-clip. You may need pliers to push the E-clip into

position.

Figure 10: Position of E-clip on the foot rest

4. Slide a foot rest onto the other side of the axle and repeat

step 3.

5. After the foot rests are securely fastened to the axle,

check that the axle is centered through the seat frame.

Then tighten the two small set screws that hold the axle

in position using a 3mm hex wrench.

Note: Do not overtighten the screws.

Figure 11: Tighten set screws on axle

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Precor 240I Stretch Trainer in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Precor 240I Stretch Trainer Manual

Product: