534698
46
Zoom out
Zoom in
Previous page
1/54
Next page
3. Operation
UP! 3D Printer User Manual 45
7.0. Tips & Tricks
Large parts can sometimes have their corners lift from the platform, which
causes the part to distort. This is caused by uneven heat across the surface of
the platform. Preheating the platform before beginning large parts is essential
to minimize this lifting. Also, the faster you can print such parts, the less lifting
you are likely to get. Some ways to increase print quality include:
If possible, try to avoid printing such large parts in solid mode.
Set the layer resolution to as high as you can get away with.
Print the part in ―Fast‖ mode.
Removing the screws that attach the print platform to the printer can be
inconvenient. This can be made much easier by printing little screw caps with
handles on them, that get epoxied to the screw heads. This means the screws
can then be removed without the need for a tool. Files for the screw caps can
be downloaded from: http://www.thingiverse.com/thing:4113
After printing, use a fast drying epoxy glue to glue them onto the screws,
Clamp the screw and cap in a vice until the glue is dry to prevent the screw cap
not sitting firmly on the screw.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PP3DP Up Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PP3DP Up Plus in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info