534698
29
Zoom out
Zoom in
Previous page
1/54
Next page
3. Operation
UP! 3D Printer User Manual 28
New Spool: This is used so the printer can keep track of how much material
has been used, and warn you if you don‘t have enough material left to print
your model. Click this button and enter the value of how many grams of
material you have on the current spool. If it is a new spool, the quantity should
be set to 700 grams. You can also specify whether the material you are printing
with is ABS or PLA.
TIP: An empty spool weighs about 280 grams so, if you are installing a partially
used spool, weigh it, and subtract 280 grams from the weight. This gives
you the value to enter into the material text box.
Status: Displays the temperature of the nozzle and platform.
Stop All: Stops heating and all the movement of the printer. Once you click this
button, the current model being printed is cancelled. You CANNOT resume a
print job once the printer has been stopped. After you use the ―Stop All‖ option,
you will need to re-initialize the printer.
Pause Print: This button allows you to pause a print in mid-progress, but yu
can then resume the print job where it left off. This is very useful if you, for
example, want to change the material colour mid-print. Another popular use for
pausing a job mid-print is to allow fasteners to be inserted into printed cavities
and then printed over to lock the fastener into place.
Nozzle & Platform: The five buttons (FL, FR, Center, NL, NR) control the
position of the nozzle and the platform. The nozzle moves to the left and right;
the platform moves forward and backward.
The ―To‖ button controls the height of the platform, and is used in the nozzle
height calibration procedure described in 3.3.2.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PP3DP Up Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PP3DP Up Plus in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info