685364
24
Zoom out
Zoom in
Previous page
1/42
Next page
3) If a fault occurs during the operation of the PT-3000, correct the problem and then
reset the PT ECU-64. To do this the main power switch for the APU (located on
the internal control panel on the APU) must be turned OFF then back ON. This
will clear the fault code.
IMPORTANT: Make sure driver control panel switch is in the OFF position before
attempting to clear fault codes. If driver control panel switch is in ON position when
resetting the ECU, the unit will start and possibly cause injury.
Stopping the Engine
It is recommended to disconnect or reduce the power load by turning off
appliances before shutting down the engine. Push the drivers control switch to the STOP
position, the engine will stop.
Powering Appliances and Auxiliary Systems
Once the PT-3000 is running, you will have AC power through the power outlet
box. Plug devices such as television, DVD player, cell phone charger etc. directly into
outlet.
For heating and air conditioning system please refer to the user’s guide supplied
with the heating and air conditioning system.
IMPORTANT: Damage to starter motor, starter solenoid, run solenoid or any generator
component due to excessive or prolonged starting attempts, or attributed to an external
low battery control monitoring or auto start system not approved by Power Technology
SE Inc. will not be covered by the Power Technology SE inc. limited warranty.
21
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PT-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PT-3000 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info