685364
18
Zoom out
Zoom in
Previous page
1/42
Next page
MOUNTING THE CONTROL BOX
Once all connections are made to the start/stop switch and the hour meter, fasten the
control box to the desired location with the screws provided.
INSTALLING THE POWER OUTLET BOX
SELECT LOCATION
Determine the location for the AC power outlet box. It should be mounted where the
driver has easy access to the outlets. Consideration should be taken as to the devices the
driver will need AC power for such as, Television, microwave, refrigerator etc.
Suggestion, mount the outlet box where most of the appliances a driver may use will be
within reach of the outlets without the use of extension chords.
MOUNTING THE POWER OUTLET BOX
Secure the power outlet box to desired location with the screws provided.
ROUTING WIRES
Once location has been chosen for the power outlet box, route the wires back to the
terminal block making sure the wires are secured with wire ties or clamps. These wires
should be ran in a way that they will not interfere with anything under the bunk and clear
of anything abrasive.
CONNECTIONS
Once wires are secured connections for the AC power can be made. Cut the outlet box
cord to the desired length. Carefully remove approximately 2” to 2 ½” of the outer jacket
from the cord. Separate the 3 wires and crimp the appropriate terminal connector to each
wire. Connect the black positive (+) wire to the black wire on the terminal block. Connect
the white wire to the white wire on the terminal block and the green wire to the ground
(green) wire on the terminal block.
15
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PT-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PT-3000 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info