541872

Powertap Joule GPS Manual

59
Zoom out
Zoom in
Previous page
1/66
Next page
Message Action Action
Bike
Selected Edit Shows the bike screen Use Activates the selected bike
for the selected bike
Delete Bike
Cancel Dismisses popup OK Deletes the selected bike
Delete Sensor
Cancel Dismisses popup OK Deletes the selected sensor
Rolldown
Complete OK Dismisses popup
Navigate to
Cancel Dismisses popup OK Begins navigating to the selected waypoint
Delete Waypoint
Cancel Dismisses popup OK Deletes the selected waypoint
Ride
Cancel Dismisses popup OK Begins following the selected route
Delete Route
Cancel Dismisses popup OK Deletes the selected route
Calibration
Complete OK Dismisses popup
Selected Edit Shows the user Use Activates the selected user
Below screen for the selected user
Power Cancel Turns off power zone warnings. OK Dismisses popup
Above Warnings are re-activated the
next time the unit wakes up.
Power Cancel Turns off power zone warnings. OK Dismisses popup
Below Warnings are re-activated the
next time the unit wakes up.
Heart Rate Cancel Turns off heart rate zone warnings. OK Dismisses popup
Above Warnings are re-activated the next
time the unit wakes up.
Heart Rate Cancel Turns off heart rate zone warnings. OK Dismisses popup
Warnings are re-activated the
next time the unit wakes up.
Appendix B: POP-UP WINDOWS
Message Action Action
MEMORY
FULL OK Dismisses popup
LOST SIGNAL FIND Initiates an immediate find OK Turns off finding for specified sensor until device
GPS goes to sleep
SENSOR
DEVICE
LOW
BATTERY OK Dismisses popup
GPS
SIGNAL
LOST OK Dismisses popup
Workout
Complete RESTART Restarts the workout OK Dismisses popup
SPEED OK Dismisses popup (popup will dismiss automatically
UP when you reach the minimum speed)
SLOW OK Dismisses popup (popup will dismiss automatically
DOWN when you reach the maximum speed)
PowerBeam
Detected
GPS Off OK Dismisses popup
Are you
riding
indoors? No Continues searching for GPS Yes Turns the GPS off
GPS Off OK Dismisses popup
GPS NOT
ACQUIRED
Turn GPS
Off? No Continues searching for GPS Yes Turns the GPS off
Route Point Map Shows the map screen OK Dismisses popup
Off Course
Warning Map Shows the map screen OK Dismisses popup
Course
Found OK Dismisses popup
Joule GPS User Guide page 59
Understanding GPS Signal Acquisition and Signal Strength
Overview:
The Global Positioning System, GPS, originally developed for military purposes, was deployed over the span of years
beginning in the 1980s, completing deployment in 1995. Today the GPS system is primarily used for civilian
applications. Within the next 5 to 6 years there will be 3 fully independent Global Navigational Satellite Systems in
service - the United States will continue to provide and improve GPS, the European Union will complete deployment
of their system, GALILEO and Russia will complete deployment of their system GLONASS.
The GPS is a constellation of 32 fully operational satellites orbiting the earth in 6 different orbital planes, with 5 to 6
satellites per orbit. At any one time 24 of the satellites are considered “in service.” The others are available in case
one of the 24 needs to come offline for maintenance issues. The satellites circle the earth at an attitude of 20,180
kilometers (about 12 miles). Each orbit takes about 12 hours, but due to the earth’s rotation, each satellite returns to
it’s starting point above earth in just under 24 hours. The 6 orbital planes, including the number and spacing of
satellites in each plane are designed to ensure that there are a minimum of 4 satellites in view of any location on
earth at any time. Typically there are more than 4. The more satellites a receiver locks onto, the more accurate the
position data. Receivers positioned in higher latitudes will typically “see” less satellites. The master control station
for the entire GPS network is located in Colorado. There are 5 additional monitoring stations around the world.
GPS Signal Strength:
GPS signal strength can be affected by many conditions. These include weather, the environment, receiver
movement, and the orbital position of the satellites. This is especially noticeable at the point in time when the
receiver is attempting to get a full GPS lock (typically means the reciever is locked onto a minimum of 4 satellites for
accurate location data).
• When considering the weather, the signal strength is affected by the density of any clouds. Heavy rain or snow
clouds can be a negative when it comes to GPS signal locking. This type of atmosphere tends to slow the locking
process. The best conditions are cloudless sunny days or partial high, thin cloud cover.
• Environmental considerations include whether the receiver is in a mountainous or flat area, urban or rural area,
under a tree canopy, or some combination of the above. Mountainous topography can include deep valleys or
canyons. It can be hard to receive a satellite signal when not much sky is visible. Similarly, in urban areas, tall
buildings, sometimes referred to as urban canyons, can cut down on the amount of viewable sky. Also, in rural
areas, where the receiver may be under tree-lined roads or trails, the density of the tree canopy could have an
effect on the GPS signal. The best environmental conditions for a GPS signal would be flatter terrain, rural areas,
with lots of open sky, and light to nonexistent tree cover.
• The global satellite network itself can also affect the GPS signal. As mentioned earlier, the GPS network consists
of 24 satellites in 6 different orbits around the earth. There are brief times during the day where a “coverage
hole” may temporarily exist, over a particular geographical area, due to the location of each satellite in its orbit,
at that particular point in time. In this case, the user of the receiver may need to wait a few minutes for satellite
movement to “close the coverage hole” in that geographical area.
• Receiver movement can have an affect on the initial GPS signal lock. Typically, it is better to keep the receiver
unit stationary while the unit is trying to complete the lock of the GPS signal. If movement is necessary during
the locking process, the process may take more time to complete. This occurs because, as part of the locking
process, distances to each satellite are being calculated. Any significant movement would cause the distance to
change and thus a recalculation.
• The GPS signal is a radio frequency (RF) signal. Anything that affects RF can have an impact on GPS signal
reception. Indoors, this can mean the thickness of the walls around the reciever, the roof over the reciever, or the
type of material the roof or walls are constructed from. Outdoors, this can mean paying attention to events that
can affect electro-magnetic radiation (EMR), like solar flares from the Sun. Solar activity, like the weather, is
tracked and predicted, by various organizations. On days when a major solar flare produces a huge EMR blast
toward the earth, your GPS signal will be affected.
Technical Details, Cell Phones:
As mentioned above, the GPS network was designed prior to the 1980s. The transmission rate from satellite to a
receiver on the ground is only 50 bits per second. In perfect weather conditions, once a communication is established
with the first satellite, it takes a minimum of 30 seconds to receive the initial information, a 1500 bit message block.
A receiver will need to lock on a minimum of 4 satellites to get an initial good position location. In order to find other
satellites the receiver will reference a copy of a data file, containing position data of all other satellites in the system. This
file is commonly referred to as the almanac file. Each satellite is in constant communication with the other satellites in
the system. Each satellite continually gathers up-to-date position data of the other satellites. This information becomes
the bulk of the almanac file. Receivers typically keep their copy of the almanac file updated without notice to the user.
However, receiver almanac files can become out of date by moving great distances between powering up the device or
not powering it up for a long time. If this is the case, downloading a completely new copy of the almanac will take
approximately 12.5 minutes under good sky conditions (the almanac file is approximately 25 message blocks in size,
downloading at 50 bits/sec). Once the first satellite is locked, the almanac file is determined to either already be
up-to-date or a new one is downloaded, the receiver begins to look for and lock other satellites. The complete lock
process is accelerated at this point because finding additional satellites is much quicker once the receiver knows where
to look for them via position info from the now up-to-date almanac data.
Cell phones acquire a GPS lock faster then other receivers. Most of the newer phones use what is called A-GPS,or
Assisted GPS technology. This is in essence a hybrid communication technology that allows the receiving cell phone to
acquire a GPS signal lock quickly using assistance from other technologies. Assisting technologies include cell tower
triangulation, the high speed data transmission link between the phone and the tower, and the fact that the tower, in a
fixed position, is always locked onto and monitoring the GPS satellite constellation, 24 hours per day, 7 days per week.
Leveraging these technologies, the cell phone can acquire a GPS signal lock quickly compared with other receivers
communicating directly with the satellites at 50 bits per second.
This section describes the various pop-up messages you may see on the device.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powertap Joule GPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powertap Joule GPS in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powertap Joule GPS

Powertap Joule GPS Quick start guide - English - 24 pages

Powertap Joule GPS User Manual - German - 33 pages

Powertap Joule GPS Quick start guide - German - 24 pages

Powertap Joule GPS User Manual - Dutch - 33 pages

Powertap Joule GPS Quick start guide - Dutch, French, Italian, Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info