582079
7
Zoom out
Zoom in
Previous page
1/20
Next page
POWXQG4060 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
7.2 Assembly requirements
Warning: do not start saw engine until unit is properly prepared.
Your new chain saw will require adjustment of chain, filling the fuel tank with correct fuel
mixture and filling the oil tank with chain lubricating oil before the unit is ready for operation.
Read the entire user manual before attempting to operate your unit. Pay particular attention to
all safety precautions.
Your user manual is both a reference guide and handbook provided to furnish you with
general information to assemble, operate and maintain your saw.
7.3 Guide bar / saw chain / clutch cover installation
Warning: always wear protective gloves when handling chain.
7.3.1 To install the guide bar
To ensure the bar and chain receive oil, only use the original style bar with the oil passage
hole (A) as illustrated above. (fig. 3a)
Make sure the chain brake lever is pulled back into the disengaged position(fig. 3a)
Remove the bar retaining nut(s) (B). Remove the chain brake cover (C) by pulling straight
out, some force may be required. (fig. 3c).Remove yellow spacer before mounting the bar.
Place the slotted end of the guide bar over the bar bolt (F). Slide guide bar behind clutch
drum (G) until the guide bar stops (fig. 3d).
7.3.2 To install saw chain:
Always wear heavy duty gloves when handling saw chain or making saw chain adjustments.
Spread chain out in a loop with cutting edges (1) pointing clockwise (fig. 4a).
Slip the chain around the sprocket (B) behind the clutch (C). Make sure the links fit
between the sprocket teeth (fig. 4b).
Guide the drive links into the groove (D) and around the end of the bar (fig. 4b).
Note: the saw chain may droop slightly on the lower part of bar. This is
normal.
Pull guide bar forward until chain is snug. Ensure all drive links are in the bar groove.
Install the clutch cover making sure the tang is positioned in the lower hole in the guide
bar. Make sure the chain does not slip off of the bar. Install the bar retaining nut hand tight
and follow tension adjustment instructions in section saw chain tension adjustment.
Note: the guide bar retaining nuts are installed only hand tight at this point
because saw chain adjustment is required. Follow instructions in section
saw chain tension adjustment.
7.3.3 Saw chain tension adjustment
Proper tension of saw chain is extremely important and must be checked before starting, as
well as during any cutting operation.
Taking the time to make needed adjustments to the saw chain will result in improved cutting
performance and prolonged chain life.
Warning: always wear heavy duty gloves when handling saw chain or
making saw chain adjustments.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQG4060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQG4060 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQG4060

Powerplus POWXQG4060 User Manual - German - 23 pages

Powerplus POWXQG4060 User Manual - Dutch - 22 pages

Powerplus POWXQG4060 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info