Manual Powerplus POWXQ5350 (page 13 of 22) (English)

481029

Zoom out

Zoom in

1/22

POWXQ5350 EN

11.1.5 Mitre sawing (Fig. 5)

During mitre sawing, the workpiece is sawed at an angle in relation to the mitre and width

guide.

 Starting position:

o Saw head completely raised.

o The motor head stands in a vertical position (90°), and the bevelling lock knob is

tightened.

 Sawing the workpiece:

o Release the mitre locking knob.

o Set the desired angle.

o Tighten the mitre locking knob once more.

o Hold the workpiece against the mitre and width guide. If necessary, use a work clamp

for fastening the workpiece.

o Activate the switch and activate/push on the safety lock.

o Lower the saw head carefully and completely downwards while holding firmly onto the

handgrip. You should only apply medium pressure while sawing, so as to prevent that

the speed of the motor slows down.

o Saw the workpiece in one single movement.

o Carefully let the saw head return to its topmost starting position.

o The saw should be switched off by releasing the switch, if no further sawing has to be

done.

Note: The mitre saw is activated at certain angles, such as at 0°, 15°, 22.5°,

30° and 45°.

11.1.6 Bevelling (Fig. 6)

During bevelling, the workpiece is sawn at an angle of less than 90°.

 Starting position:

o Saw head completely raised.

o Motor head in the 0° position; the locking screw of the turntable is tightened.

11.1.7 Sawing the workpiece:

 Release the bevelling locking knob for tilting the saw head close to the saw.

 Tilt the motor head carefully to the desired position.

 Tighten up the bevelling lock knob.

 Hold the workpiece against the mitre and width guide. If necessary, use a work clamp for

fastening the workpiece. (20)

 Activate the switch and activate/push on the safety lock.

 Lower the saw head carefully and completely downwards, while firmly holding onto the

handgrip. You should only apply medium pressure while sawing, so as to prevent that the

speed of the motor slows down.

 Saw the workpiece in one single movement.

 Carefully let the saw head return to its topmost starting position.

 The saw should be switched off by releasing the switch, if no further sawing has to be

done.

11.1.8 Double mitre cut

A double mitre cut is a combination of a mitre cut and a bevelling cut; this means that the

workpiece is cut at an angle in the one single movement, which is not equal to 90° in relation

to the mitre and width guide and the material surface.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5350 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5350

Powerplus POWXQ5350 User Manual - German - 23 pages

Powerplus POWXQ5350 User Manual - Dutch - 23 pages

Powerplus POWXQ5350 User Manual - French - 22 pages

Powerplus POWXQ5350 Additional guide - All languages - 5 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerplus POWXQ5350 Manual

Product: