481029
9
Zoom out
Zoom in
Previous page
1/22
Next page
POWXQ5350 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
Make sure that any spacers and spindle rings used are suitable for the purpose as stated
by the manufacturer.
8 ELECTRICAL SAFETY
Check the voltage that is documented on the type plate of the machine, to
make sure that it corresponds to the locally available mains voltage.
Safety class II.
9 SPECIAL PRODUCT CHARACTERISTICS
Quick change-over between cross-cut and table saw mode.
45° sawing range for bevelling (45° left).
98° sawing range for mitre sawing (49° left or 49° right) with ten preset stops.
Robust, cast aluminum construction for precision sawing.
Installation of additional guides possible.
After an interruption of the power supply, a restart protection prevents that the machine
starts up again when the power supply is restored.
10 INSTALLATION AND TRANSPORT
Do not carry the machine on the handgrip; the handgrip is not designed to
carry the full weight of the machine.
For carrying the machine, hold it on both edges of the base .
10.1 Installation
Get help from another person for lifting the machine out of the box.
Turn the turntable into the 0° position and tighten up the mitre locks.
Note: If the machine must be mounted on a workbench, then the rubber feet
should NOT be installed.
You run the risk of injury, if you handle the machine incorrectly when lifting
or turning it. Always hold the machine firmly by the base.
Position the machine on a suitable surface:
o All 4 feet must rest firmly on the surface.
o The ideal height of the surface is approximately 800 mm.
o The saw must stand firmly in position, even when larger workpieces are being sawn.
o An additional support at the back of the machine has to be pull out.
You can keep the packaging for future use, or you can dispose of it separately, based on
the type of material, and it in an environmentally friendly manner.
10.2 Transport (30)
Position the lowest saw blade guard over the saw guide piece and push backwards until
you hear a click, and until he saw blade protector is positioned at the black line on the saw
guide piece.
Lower the saw head by pushing in the safety lock and activate the locking pin.
Lift the machine up by grasping both sides of the base.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5350 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5350

Powerplus POWXQ5350 User Manual - German - 23 pages

Powerplus POWXQ5350 User Manual - Dutch - 23 pages

Powerplus POWXQ5350 User Manual - French - 22 pages

Powerplus POWXQ5350 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info