672471
8
Zoom out
Zoom in
Previous page
1/15
Next page
POWXG3043 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
8.4.3 Installation of the cutting section of the machine (Fig. 5A)
Pull the locking pin (1) out and turn it left and right to unlock it. Then push the cutting
section of the machine (2) inwards and release the locking pin (1). Make sure that it is
secured in the hole (3) of the drive shaft. This is easier to do if you slightly rotate the tip of
the drive shaft (2) in both directions. The locking pin (1) is in place when it is fully inserted
in the hole.
Finally, tighten the knob (4).
9 FUEL AND LUBRICATION
9.1 Fuel
Use regular grade unleaded petrol mixed with 40:1 custom 2-cycle engine oil for best results.
WARNING: Never use normal petrol in your unit. This will cause permanent
engine damage and void the manufacturer’s warranty for the product. Never
use a fuel mixture that has been stored for over 90 days.
WARNING: 2-cycle lubricant must be a premium grade oil for 2-cycle air
cooled engines mixed at a 40:1 ratio. Do not use any 2-cycle oil product with a
recommended mixing ratio of 100:1. If insufficient lubrication is the cause of
engine damage, it voids the manufacturer’s engine warranty.
9.2 Mixing fuel
Add oil to an approved fuel container followed by the petrol to allow incoming petrol to mix with
oil. Shake container to ensure thorough mix.
WARNING: Lack of lubrication voids engine warranty. Petrol and oil must be
mixed at 40:1.
9.2.1 Fuel and lubrication symbols
9.2.2 Recommended fuels
Some conventional kinds of petrol are now blended with oxygenates such as alcohol or an
ether compound to meet clean air standards. The engine is designed to operate satisfactorily
with any petrol intended for automotive use including oxygenated petrol.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG3043 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG3043 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG3043

Powerplus POWXG3043 User Manual - German - 18 pages

Powerplus POWXG3043 User Manual - Dutch - 17 pages

Powerplus POWXG3043 User Manual - French - 17 pages

Powerplus POWXG3043 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info