672471
7
Zoom out
Zoom in
Previous page
1/15
Next page
POWXG3043 EN
Copyright © 2017 VARO P a g e | 7 www.varo.com
8 ASSEMBLY
Switch off the tool and remove the cap from the spark plug before fulfilling all
procedures.
Do not draw up the fastening elements too tight to avoid damaging the thread.
8.1 Bike handle installation (Fig. 1)
Install the U-handle on the fixing holder, install the clamp and fasten with the screws.
To adjust the angle of the additional handle, loosen the 4 upper bolts and change the
angle of inclination. After finishing the adjustment, tighten the bolts.
8.2 Installation protection guard (Fig. 2)
Position the guard so it can be fixed into place with the clamp and the screws.
Tighten the screws.
8.3 Installing the harness (Fig. 3)
Put on the carrying belt.
Adjust the length of the belt in such a way that you feel comfortable and suspend the tool
on the safety catch of the carrying belt.
The cutting accessory should touch the ground. If this is not the case, make adjustment.
Loosen the clamping bolt with the Allen key.
Move the fastening to the desired position by sliding it along the tube.
Tighten the clamping bolt with the Allen key.
8.4 Installing the cutting disc/spool
CAUTION: NEVER use unit if blade is warped or has teeth that are chipped or
missing. Replace a damaged blade immediately.
CAUTION: Always wear heavy-duty work gloves when handling and installing
a blade.
8.4.1 Assembly metal blade (Fig. 4)
Install the cutting disc , outer flange and cap on the spindle. Then tighten the nut.
When mounting, the direction of the arrow on the cutting disc must always coincide with
the direction of the arrow on the protective cover.
8.4.2 Assembly spool (Fig. 5)
Install the outer flange on the spindle shaft.
Install the spool and tighten it.
STOP ENGINE IMMEDIATELY!
Excessive vibration of blade means that it is not properly installed-stop
engine immediately and check blade. Blade not properly installed will cause
injury.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG3043 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG3043 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG3043

Powerplus POWXG3043 User Manual - German - 18 pages

Powerplus POWXG3043 User Manual - Dutch - 17 pages

Powerplus POWXG3043 User Manual - French - 17 pages

Powerplus POWXG3043 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info