582100

Powerplus POWXG3025 Manual

15
Zoom out
Zoom in
Previous page
1/20
Next page
POWXG3025 EN
Copyright © 2015 VARO P a g e | 15 www.varo.com
11.4.2 Grass clearing using a grass blade
Grass blades and grass cutters must not be used on woody stems.
A grass blade is used for all types of tall or coarse grass.
The grass is cut down with a sideways, swinging movement, where the movement from right-
to-left is the clearing stroke and the movement from left-to- right is the return stroke. Let the
left-hand side of the blade (between 8 and 12 o’clock) do the cutting.
If the blade is angled to the left when clearing grass, the grass will collect in a line, which
makes it easier to collect, e.g. by raking.
Try to work rhythmically. Stand firmly with your feet apart. Move forward after the return stroke
and stand firmly again.
Let the support cup rest lightly against the ground. It is used to protect the blade from hitting
the ground.
Reduce the risk of material wrapping around the blade by following these instructions:
Always work at full throttle.
Avoid the previously cut material during the return stroke.
Stop the engine, unclip the harness and place the machine on the ground before you start to
collect the cut material.
11.4.3 Grass trimming with a trimmer head
11.4.3.1 Trimming (Fig. 29)
Hold the trimmer head just above the ground at an angle. It is the end of the cord that does the
work. Let the cord work at its own pace. Never press the cord into the area to be cut.
The cord can easily remove grass and weeds up against walls, fences, trees and borders,
however it can also damage sensitive bark on trees and bushes, and damage fence posts.
Reduce the risk of damaging plants by shortening the cord to 10-12 cm and reducing the
engine speed.
11.4.3.2 Clearing (Fig. 30)
The clearing technique removes all unwanted vegetation. Keep the trimmer head just above
the ground and tilt it. Let the end of the cord strike the ground around trees, posts, statues and
the like.
CAUTION! This technique increases the wear on the cord.
The cord wears quicker and must be fed forward more often when working against stones,
brick, concrete, metal fences, etc., than when coming into contact with trees and wooden
fences.
When trimming and clearing you should use less than full throttle so that the cord lasts longer
and to reduce the wear on the trimmer head.
11.4.3.3 Cutting (Fig. 31)
The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep
the cord parallel to the ground when cutting. Avoid pressing the trimmer head against the
ground as this can ruin the lawn and damage the tool.
Do not allow the trimmer head to constantly come into contact with the ground during normal
cutting. Constant contact of this type can cause damage and wear to the trimmer head.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG3025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG3025 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG3025

Powerplus POWXG3025 User Manual - German - 22 pages

Powerplus POWXG3025 User Manual - Dutch - 22 pages

Powerplus POWXG3025 User Manual - French - 22 pages

Powerplus POWXG3025 Additional guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info