582100
14
Zoom out
Zoom in
Previous page
1/20
Next page
POWXG3025 EN
Copyright © 2015 VARO P a g e | 14 www.varo.com
Do not put any part of your body in marked area. Contact can result in burns to the skin, or
electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a
machine with damaged spark plug cap.
IMPORTANT If the starter rope is pulled repeatedly with the choke on,
it may flood the engine and make starting difficult.
If you happen to food the engine, repeat the hot start procedure a few times to eliminate any
excess fuel.
11.3.2.2 Hot starting
To hot start the engine immediately after it has stopped, follow steps a b d g of the above
procedure, making sure the primer bulb is activated 2-3 times only.
11.3.2.3 Stopping: (Fig. 28)
Stop the engine by switching off the ignition.
11.4 General working instructions
IMPORTANT! This section describes the basic safety precautions for
working with brush cutters and trimmers.
If you encounter a situation where you are uncertain how to proceed you should ask an expert.
Contact your dealer or your service workshop.
Avoid all usage which you consider to be beyond your capability.
You must understand the difference between forestry clearing, grass clearing and grass
trimming before use.
11.4.1 Basic working techniques
Always slow the engine to idle speed after each working operation. Long periods at full throttle
without any load on the engine can lead to serious engine damage.
Sometimes branches or grass get caught between the guard and cutting
attachment. Always stop the engine before cleaning.
Machines fitted with grass blades can be thrown violently to the side when
the blade comes into contact with a fixed object. This is called blade thrust.
A blade thrust can be violent enough to cause the machine and/or operator
to be propelled in any direction, and possibly lose control of the machine.
Blade thrust can occur without warning if the machine snags, stalls or
binds. Blade thrust is more likely to occur in areas where it is difficult to
see the material being cut.
Avoid cutting with the area of the blade between the 12 o'clock and 3
o'clock positions. Because of the speed of rotation of the blade, blade
thrust can occur if you attempt to cut thick stems with this area of the
blade.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG3025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG3025 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG3025

Powerplus POWXG3025 User Manual - German - 22 pages

Powerplus POWXG3025 User Manual - Dutch - 22 pages

Powerplus POWXG3025 User Manual - French - 22 pages

Powerplus POWXG3025 Additional guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info