582100
10
Zoom out
Zoom in
Previous page
1/20
Next page
POWXG3025 EN
Copyright © 2015 VARO P a g e | 10 www.varo.com
Hook the blade guard/combination guard onto the fitting on the shaft and secure with three
bolts. (Fig. 13)
Enter the guard extension guide in the slot of the combination guard. Then click the guard
extension into position on the guard with some claws. (Fig. 14)
The guard extension is removed easily using a screwdriver, see illustration. (Fig. 15)
11.1.5 Fitting a blade guard, grass blade and grass cutter
Hook the blade guard/combination guard onto the fitting on the shaft and secure with three
bolts. Use the recommended blade guard. See the Technical data section. (Fig. 16)
CAUTION! Ensure that the guard extension is removed.
Fit the top clamping plate (B) on the output shaft.
Turn the blade shaft until one of the holes in the top clamping plate aligns with the
corresponding hole in the top protecting cap.
Insert the locking pin (A) in the hole to lock the shaft.
Place the blade (C), bottom clamping plate (D) and bottom protecting cap (E) on the
output shaft. (Fig. 17)
Fit the nut (F). The nut must be tightened to a torque of 35-50 Nm. Use the socket
spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as
possible. To tighten the nut, turn the spanner in the opposite direction to the direction of
rotation (Caution! left-hand thread).
Pull out the locking pin after all installation process has been finished.
11.1.6 Fitting the trimmer guard and trimmer head (Fig. 18)
Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with
three bolts.
Fit the top clamping plate (B) on the output shaft.
Turn the blade shaft until one of the holes in the top clamping plate aligns with the
corresponding hole in the top protecting cap (C).
Insert the locking pin (A) in the hole to lock the shaft.
Screw on the trimmer head (D) in the opposite direction to the direction of rotation.
To dismantle, follow the instructions in the reverse order.
11.1.7 Fitting cutting head (Hedge trimmer) (Fig. 19)
Fit the cutting head (B) on the shaft tube (A) so that the screw hole on the cutting head is
aligned with the position hole (A1) on the shaft tube as shown. Then, tighten the lock screw (D)
and the position screw (C) securely.
Changing the hedge trimmer angle
Press the safety lever (E). Then press the lock lever (F), at the same time hold the grip (G)
and turn the cutting head to a desired angle (α).
11.1.8 Adjusting the harness (Fig. 20)
WARNING! When using the machine it must always be hooked securely to
the harness. Otherwise you will be unable to control the brush cutter safely
and this can result in injury to yourself or others. Never use a harness with
a defective quick release.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG3025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG3025 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG3025

Powerplus POWXG3025 User Manual - German - 22 pages

Powerplus POWXG3025 User Manual - Dutch - 22 pages

Powerplus POWXG3025 User Manual - French - 22 pages

Powerplus POWXG3025 Additional guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info